NAT-typ 3 on PS4 even with UPnP on

NAT-typ 3 on PS4 even with UPnP on

NAT-typ 3 on PS4 even with UPnP on
NAT-typ 3 on PS4 even with UPnP on
2 недель назад - last edited неделю назад
Model: Deco X80-5G  
Hardware Version:
Firmware Version: 2.13 Buil 20240111

Hi,

I cant get my PS4 to change to NAT-typ 2 or 1 with UPnP on the router on. How can I get the PS4 to work correct? 
I have a Deco X80-5G router with M9 Deco system 

  0      
  0      
#1
Options
1 Accepted Solution
Re:NAT-typ 3 on PS4 even with UPnP on-Solution
2 недель назад - last edited неделю назад

  @MrPinkSr 

 

I think that you don't have a public IPv4 address. You can contact your mobile provider and ask if it is possible to get one.

 

best regards

Paul

Recommended Solution
  1  
  1  
#2
Options
7 Reply
Re:NAT-typ 3 on PS4 even with UPnP on-Solution
2 недель назад - last edited неделю назад

  @MrPinkSr 

 

I think that you don't have a public IPv4 address. You can contact your mobile provider and ask if it is possible to get one.

 

best regards

Paul

Recommended Solution
  1  
  1  
#2
Options
Re:NAT-typ 3 on PS4 even with UPnP on
2 недель назад

  @delong91 

Thanks, i have also setup a port forwarding on requested ports but with no success. 
 

  0  
  0  
#3
Options
Re:NAT-typ 3 on PS4 even with UPnP on
2 недель назад

  @MrPinkSr 

 

This won't help unless you have a public IPv4 address. Have you checked this?

  0  
  0  
#4
Options
Re:NAT-typ 3 on PS4 even with UPnP on
2 недель назад

  @delong91 

Im calling the ISP right now to see. 

  0  
  0  
#5
Options
Re:NAT-typ 3 on PS4 even with UPnP on
2 недель назад

  @delong91 

Can I check it on the router if I have a public up address? I see WAN IP 100.116.174.86 on the router 

  0  
  0  
#6
Options
Re:NAT-typ 3 on PS4 even with UPnP on
2 недель назад

  @MrPinkSr 

I have not a public IP address. Im changing ISP service now to get one. 

  0  
  0  
#7
Options
Re:NAT-typ 3 on PS4 even with UPnP on
2 недель назад - last edited 2 недель назад

  @MrPinkSr 

 

That is the problem as expected. After the change it should work with NAT2

  0  
  0  
#8
Options