Can't enter multiple Wireguard Allowed IP ranges

Alsir

2024-10-25 04:50:15 - last edited 2024-10-28 07:54:48

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-10-25

Can't enter multiple Wireguard Allowed IP ranges

2024-10-25 04:50:15 - last edited 2024-10-28 07:54:48

Tags: #VPN #WireGuard

Model: Archer AX55

Hardware Version: V1

Firmware Version: 1.3.3 Build 20240628 rel.37017(5255)

My devises uses a Wireguard VPN server with multiple allowed IPs. I can configure the Mac version of Wireguard just fine, but when I try to set up the Wireguard VPN Client I get an "Invalid Format" message from having multiple allowed IPs. Is there a workaround to get this working?

AllowedIPs = 0.0.0.0/0,8.8.4.0/24,8.8.8.0/24,8.34.0.0/16,8.35.0.0/16,23.236.0.0/16,23.251.0.0/16,31.13.0.0/16,34.0.0.0/10,34.64.0.0/10,35.184.0.0/13,35.192.0.0/14,35.196.0.0/15,35.198.0.0/16,35.199.0.0/17,35.200.0.0/13,35.208.0.0/12,45.64.0.0/16,46.19.0.0/16,57.144.0.0/16,64.18.0.0/16,64.233.0.0/16,66.102.0.0/16,66.220.0.0/16,66.249.0.0/16,68.66.0.0/16,70.32.0.0/16,72.14.0.0/16,72.52.0.0/16,74.114.0.0/16,74.119.0.0/16,74.125.0.0/16,81.29.0.0/16,83.174.0.0/16,84.15.0.0/16,87.245.0.0/16,91.213.0.0/16,92.46.0.0/16,94.140.0.0/16,103.4.0.0/16,103.4.96.0/22,104.18.0.0/16,104.21.0.0/16,104.31.0.0/16,104.32.0.0/16,104.132.0.0/16,104.133.0.0/16,104.134.0.0/15,104.156.0.0/16,104.237.0.0/16,108.170.0.0/16,108.177.0.0/15,108.177.0.0/16,108.59.0.0/16,130.211.0.0/16,136.112.0.0/12,142.250.0.0/16,142.251.0.0/16,146.148.0.0/16,157.240.0.0/16,162.159.0.0/16,162.216.0.0/16,162.222.0.0/16,172.110.0.0/16,172.217.0.0/16,172.253.0.0/16,172.67.0.0/16,173.194.0.0/16,173.252.0.0/16,185.38.0.0/16,185.53.0.0/16,185.60.0.0/16,185.89.0.0/16,188.114.0.0/16,190.115.0.0/16,192.158.0.0/16,192.178.0.0/15,193.46.0.0/16,193.186.0.0/16,199.36.0.0/16,199.192.0.0/16,199.223.0.0/16,204.15.0.0/16,207.223.0.0/16,208.65.0.0/16,208.68.0.0/16,208.81.0.0/16,208.117.0.0/16,209.85.0.0/16,209.85.128.0/17,216.40.0.0/16,216.58.0.0/16,216.58.192.0/18,216.239.0.0/16,216.239.32.0/19,217.168.0.0/16,124.108.0.0/16,129.134.0.0/16,130.211.0.0/16,136.112.0.0/12,146.148.0.0/16,162.159.0.0/16,162.216.0.0/16,162.222.0.0/16,173.255.0.0/16,185.214.0.0/16,185.38.0.0/16,185.53.0.0/16,185.60.0.0/16,185.89.0.0/16,190.115.0.0/16,195.123.0.0/16,194.110.0.0/16,176.97.0.0/16,5.45.0.0/16,193.46.0.0/16,68.66.0.0/16,92.46.0.0/16,124.108.0.0/16

1 Reply

Kevin_Z

2024-10-28 08:59:09

Posts: 21782

Helpful: 5160

Solutions: 2575

Stories: 21

Registered: 2018-12-24

Re:Can't enter multiple Wireguard Allowed IP ranges

2024-10-28 08:59:09

@Alsir

Please note that the Allowed IPs cannot contain overlapping or supernet IP addresses. If they do, you will receive an Invalid format error.

In your configuration, please try to modify the Allowed IPs as follows to check if you can save the settings:

AllowedIPs =5.45.0.0/16,8.8.4.0/24,8.8.8.0/24,8.34.0.0/16,8.35.0.0/16,23.236.0.0/16,23.251.0.0/16,31.13.0.0/16,34.0.0.0/10,34.64.0.0/10,35.184.0.0/13,35.192.0.0/14,35.196.0.0/15,35.198.0.0/16,35.199.0.0/17,35.200.0.0/13,35.208.0.0/12,45.64.0.0/16,46.19.0.0/16,57.144.0.0/16,64.18.0.0/16,64.233.0.0/16,66.102.0.0/16,66.220.0.0/16,66.249.0.0/16,68.66.0.0/16,70.32.0.0/16,72.14.0.0/16,72.52.0.0/16,74.114.0.0/16,74.119.0.0/16,74.125.0.0/16,81.29.0.0/16,83.174.0.0/16,84.15.0.0/16,87.245.0.0/16,91.213.0.0/16,92.46.0.0/16,94.140.0.0/16,103.4.0.0/16,104.18.0.0/16,104.21.0.0/16,104.31.0.0/16,104.32.0.0/16,104.132.0.0/16,104.133.0.0/16,104.134.0.0/15,104.156.0.0/16,104.237.0.0/16,108.59.0.0/16,108.170.0.0/16,108.176.0.0/15,124.108.0.0/16,129.134.0.0/16,130.211.0.0/16,136.112.0.0/12,142.250.0.0/16,142.251.0.0/16,146.148.0.0/16,157.240.0.0/16,162.159.0.0/16,162.216.0.0/16,162.222.0.0/16,172.67.0.0/16,172.110.0.0/16,172.217.0.0/16,172.253.0.0/16,173.194.0.0/16,173.252.0.0/16,173.255.0.0/16,176.97.0.0/16,185.38.0.0/16,185.53.0.0/16,185.60.0.0/16,185.89.0.0/16,185.214.0.0/16,188.114.0.0/16,190.115.0.0/16,192.158.0.0/16,192.178.0.0/15,193.46.0.0/16,193.186.0.0/16,194.110.0.0/16,195.123.0.0/16,199.36.0.0/16,199.192.0.0/16,199.223.0.0/16,204.15.0.0/16,207.223.0.0/16,208.65.0.0/16,208.68.0.0/16,208.81.0.0/16,208.117.0.0/16,209.85.0.0/16,216.40.0.0/16,216.58.0.0/16,216.239.0.0/16,217.168.0.0/16

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

Can't enter multiple Wireguard Allowed IP ranges

Can't enter multiple Wireguard Allowed IP ranges

Information

Voters 0

Tags