Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > BE800 via 10 Gbps WAN/LAN Port --> BE805 10 Gbps WAN Port for Ethernet Backhaul, can it work

< Wi-Fi Routers

BE800 via 10 Gbps WAN/LAN Port --> BE805 10 Gbps WAN Port for Ethernet Backhaul, can it work

DragonOx

3 weeks ago - last edited 3 weeks ago

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-10-24

BE800 via 10 Gbps WAN/LAN Port --> BE805 10 Gbps WAN Port for Ethernet Backhaul, can it work

3 weeks ago - last edited 3 weeks ago

Tags: #EasyMesh Ethernet Backhaul #Wi-Fi 7 #10 Gbps

Model: Archer BE800 Archer BE805

Hardware Version: V1

Firmware Version: 1.1.6 Build 20240808 rel.26673(5347)

I'm planning to linked my existing BE800 (main router) to another BE805 via ethernet to extend my wireless network.

I understand that the BE805 has 2 x 10 Gbps WAN & LAN Ports

I would to know if the Ethernet Backhaul can work if i connect the LAN cable via 10 Gbps WAN/LAN Port on the BE800 --> 10 Gbps WAN Port on the BE805 as I would need to connect the other 10 Gbps LAN Port on the BE805 to my 10Gbps switch

Regards

1 Accepted Solution

Kevin_Z

3 weeks ago - last edited 3 weeks ago

Posts: 21569

Helpful: 5032

Solutions: 2542

Stories: 21

Registered: 2018-12-24

Re:BE800 via 10 Gbps WAN/LAN Port --> BE805 10 Gbps WAN Port for Ethernet Backhaul, can it work -Solution

3 weeks ago - last edited 3 weeks ago

@DragonOx

Yes.

Once the EasyMesh Ethernet Backhaul gets established, you can connect a LAN cable from the 10 Gbps WAN/LAN Port on the BE800 to the 10 Gbps WAN Port on the BE805.

Keep the new BE805 in its factory default state and first connect its LAN port to the LAN port of the main BE800 to create the Ethernet Backhaul. After that, you can move the cable to its WAN port as needed. Be sure to check the tips in this thread:

How to Build an Ethernet Backhaul Using Two EasyMesh Routers

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

BE800 via 10 Gbps WAN/LAN Port --> BE805 10 Gbps WAN Port for Ethernet Backhaul, can it work

BE800 via 10 Gbps WAN/LAN Port --> BE805 10 Gbps WAN Port for Ethernet Backhaul, can it work

Information

Voters 0

Tags