Home Network Community > Wi-Fi Routers > AX55 and IoT
< Wi-Fi Routers

AX55 and IoT

12

AX55 and IoT

AX55 and IoT
AX55 and IoT
2024-10-16 10:17:06 - last edited 2024-10-17 08:10:17
Tags: #IoT Network
Model: Archer AX55  
Hardware Version: V1
Firmware Version: 1.3.3 Build 20240628 rel.37017(4555)

Hi

 

Setting up an IoT network seems very straightforward and I was able to do it quickly.

However, I can't see the IoT network so I can connect to it.

What am I missing?

 

Thanks!

  0      
 
  0      
 
#1
Options
19 Reply
Re:AX55 and IoT
2024-10-16 11:18:16 - last edited 2024-10-16 18:28:24

  @Hunter_JG 

 

You just need to enable the correct band and set the wireless network SSID (setup IoT network guide):

 

 

After that, you should be able to see the IoT SSID and connect to it.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options
Re:AX55 and IoT
2024-10-16 12:50:52

  @Hunter_JG I've done that. The problem is that it doesn't matter if I keep the default SSID or change it to something else, it automatically changes it back to the "main" SSID. That then is obviously why I can't see it. The challenge then is why does it not accept my change of SSID for the IoT network?

  0  
  0  
#3
Options
Re:AX55 and IoT
2024-10-16 19:37:13

  @Hunter_JG 

 

This sounds awkward. Do you have your both main SSIDs (2.4 and 5 GHz) enabled ?

Did you try using a browser incognito tab for setting the IoT SSID (to bypass the browser cache) ?

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:AX55 and IoT
2024-10-17 06:32:00

  @terziyski Yes, both main SSIDs are enabled. Also tried incognito as you suggested, but no luck. When I save my changes, it just reverts back to the main SSID and its password. I set it up with a different name and no password (for testing purposes).

 

  0  
  0  
#5
Options
Re:AX55 and IoT
2024-10-17 08:42:51

@Hunter_JG 

 

Based on the attached screenshot, it appears that the AX55 is in AP Mode. Could you please confirm?

 

Try switching it back to Router Mode, resetting it to factory defaults, and then switching back to AP Mode to see if you can modify the IoT Network settings. Thank you!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options
Re:AX55 and IoT
2024-10-17 08:56:42

  @Kevin_Z I will double check, but I am certain I did not set it up as an AP. Does it have to be set up as an AP to utilize the IoT network option? I did not get that impression.

  0  
  0  
#7
Options
Re:AX55 and IoT
2024-10-17 09:07:22

@Hunter_JG 

 

Nope. It doesn't require to be configured as an AP. 

 

If you're not sure what is the current working mode, you may reset the AX55 first, then check if you can modify the IoT Network settings.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options
Re:AX55 and IoT
2024-10-17 09:18:39

  @Kevin_Z 

 

The screenshot is from a C64 in AP mode, which I posted just as a visual example.

The OP most probably is using his AX55 in router mode.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#9
Options
Re:AX55 and IoT
2024-10-17 12:57:05

Hello @terziyski 

Sorry that I didn't realize the screenshot was yours.blushThank you very much for providing suggestions.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#10
Options
Re:AX55 and IoT
a week ago

  @Hunter_JG same issue here, once I fixed when restore config from backup, but after some days the IoT wireless network disappear again, bit only the 2.4GHz. But my IoT devices can use 2.4GHz only. Is there any workaround or fix?

  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 513

Replies: 19

Tags

IoT Network
Related Articles
 Archer AX55 - some IoT devices disconnecting at random
264 0
 IoT network isolation
214 0
 Problem with IoT network
1166 0
 IOT and binding IOT devices to particular emitter
145 0
 Archer AX55: Main network, Guest network and IoT
1046 0
AX55 hangs
533 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.