Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > 2Gbps on X50Poe while powered by poe

< Deco

2Gbps on X50Poe while powered by poe

SpencerLim

2024-10-04 06:33:01 - last edited 2024-11-07 08:55:47

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-10-04

2Gbps on X50Poe while powered by poe

2024-10-04 06:33:01 - last edited 2024-11-07 08:55:47

Tags: #Network Connectivity #Deco Ethernet Backhaul

Model: Deco X50 - PoE TL-SG1218MPE

Hardware Version: V1

Firmware Version: 1.2.5

Current on AP mode for 6 X50-PoE via a 1218MPE switch, powered via PoE with a 1G fibre broadband.

ISP obsoleting 1G plan and now minimum is 2G.

question is how do I keep using X50-PoE, take advantage of 2.5G port and capability while powered via PoE?

limitation:All AP are already ceiling mounted and there are no provision of power point next to each unit, so only PoE is possible.

ok to change switch, but keep using X50.

any advice ?

1 Accepted Solution

David-TP

2024-11-07 08:55:31 - last edited 2024-11-07 08:55:47

Posts: 12801

Helpful: 1800

Solutions: 1294

Stories: 9

Registered: 2020-04-14

Re:2Gbps on X50Poe while powered by poe-Solution

2024-11-07 08:55:31 - last edited 2024-11-07 08:55:47

@SpencerLim

Hi, Thank you very much for the feedback.

You could consider replacing LT-SG1218MPE with SG2210XMP-M2, then connect each Deco X50-POE via its 2.5Gbps port to the switch.

https://www.tp-link.com/en/business-networking/omada-switch-smart/sg2210xmp-m2/v1/#specifications

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Recommended Solution

1 Reply

David-TP

2024-11-07 08:55:31 - last edited 2024-11-07 08:55:47

Posts: 12801

Helpful: 1800

Solutions: 1294

Stories: 9

Registered: 2020-04-14

Re:2Gbps on X50Poe while powered by poe-Solution

2024-11-07 08:55:31 - last edited 2024-11-07 08:55:47

@SpencerLim

Hi, Thank you very much for the feedback.

You could consider replacing LT-SG1218MPE with SG2210XMP-M2, then connect each Deco X50-POE via its 2.5Gbps port to the switch.

https://www.tp-link.com/en/business-networking/omada-switch-smart/sg2210xmp-m2/v1/#specifications

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

2Gbps on X50Poe while powered by poe

2Gbps on X50Poe while powered by poe

Information

Voters 0

Tags