Use TP-Link router instead of the provided ISP ONT GPON Router (Morocco - Maroc Telecom)

Use TP-Link router instead of the provided ISP ONT GPON Router (Morocco - Maroc Telecom)

Use TP-Link router instead of the provided ISP ONT GPON Router (Morocco - Maroc Telecom)
Use TP-Link router instead of the provided ISP ONT GPON Router (Morocco - Maroc Telecom)
2024-09-29 20:27:39 - last edited 2024-09-30 08:00:18
Model: Archer AX73  
Hardware Version: V1
Firmware Version: 1.3.6 Build 20240407 rel.43274(4555)

Hello everyone,

 

I would like to bridge my GPON router to my TP-Link router (Main router with linked devices via EasyMesh [1 Router on AP mode (TP-Link) and 4 RE's (1 Wi-Fi 5 ; 3 Wi-Fi 6 | All TP-Link]) and I have all my PPPoE info with access to IPv6 and IPv4. I have access to all settings and all parameters on the GPON router.

 

Current configuration: FTTH - An optical cable connected to a GPON ONT modem (G-2426G-A running on unlocked firmware with full access)

  • CAT-6 cable connected between the LAN port from ONT to the WAN port of my router.
  • PPPoE info is with me with the proper VLAN ID's for Internet, VoIP and IPTV
  • Connected the ONT directly to my TP Link router (Dynamic IP mode) via Double-NAT but creates lots of disconnects, inconsistency and latency for me. (At the moment)
  • 200Mbps Up/Down subscription (Max in Morocco).
  0      
  0      
#1
Options
3 Reply
Re:Use TP-Link router instead of the provided ISP ONT GPON Router (Morocco - Maroc Telecom)
2024-09-30 07:59:50

  @YanisTalbi 

 

Hi,thanks for posting question here.

May I confirm whether the unstable connection happens only when your clients connect to Archer AX73 via WiFi/Ethernet cable? Not related to your other TP-Link devices?

If so, please simpylify your network topology and you may refer to this guide to troubleshoot.

It is also suggested to contact local technical support from some help.

  0  
  0  
#2
Options
Re:Use TP-Link router instead of the provided ISP ONT GPON Router (Morocco - Maroc Telecom)
2024-09-30 21:04:23
No, I am talking about the connection made with my TP-Link router to my GPON ISP router (Via an Ethernet cable) because it's just a Double-NAT DHCP routed setup and creates disconnects. My ISP recommends bridging but no guides were given. They said that this will happen unless it gets fixed to bridging.
  0  
  0  
#3
Options
Re:Use TP-Link router instead of the provided ISP ONT GPON Router (Morocco - Maroc Telecom)
2024-10-01 01:08:32 - last edited 2024-10-18 21:47:05

  @YanisTalbi 

 

Your ISP should be able to put the G-2426G-A in bridge mode but if they don't know how - here's a hint - <https>://broadband.forum/threads/how-to-use-nokia-2425g-router-in-bridge-mode.207947/post-1508687

An XS-2426G-A device product guide can give your more details on its configuration options - <https>://assets-us-01.kc-usercontent.com/b33dc2a4-d1b6-0080-5fc3-5fd76f8f7dab/b6a712e7-a5c4-49a9-bf7e-afea5caf46f4/XS-2426G-A%20User-Manual.pdf

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#4
Options