Archer AX55 Pro (v1) has become unreliable

Archer AX55 Pro (v1) has become unreliable

Archer AX55 Pro (v1) has become unreliable
Archer AX55 Pro (v1) has become unreliable
2024-09-13 06:40:37 - last edited 2024-09-29 01:32:43
Model: Archer AX55 Pro  
Hardware Version: V1
Firmware Version: 1.3.1 Build 20240426 rel.31941(4555)

I purchased the AX55 Pro almost exactly a year ago and I've been very happy with it. (It was an upgrade from another Archer model and exclusively use TP-Link network devices in One Mesh mode.)

 

Recently, however, I've been experiencing outages on a weekly basis. The pattern is very much that I go to sleep with everything working fine but then wake up several hours later to find that the network is still visible but with no internet service. (There is nothing to indicate any issues with my cable router.) The only fix is to restart the AX55 Pro. Everything then works OK again only for it to happen again within a matter of days/ a week.

 

This could be a hardware fault of course but I can't help feeling that these issues started after applying the v1.3.1 update in July.

 

To clarify my network:

Ground floor: Virgin Media Hub 5 cable router in modem mode > Archer AX55 Pro v1 > TL-WPA8631P Kit v4

First floor: RE705X Range Extender v1

Basement: TL-WPA8631P v4

Out-building: TL-WPA8631P v4

 

I've set my router to automatically reboot itself once a month. I manually reboot the other devices with the same frequency.

 

Please can you advise what can be done to fix this problem.

 

Thank you.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Archer AX55 Pro (v1) has become unreliable-Solution
2024-09-14 03:33:56 - last edited 2024-09-29 01:32:43

  @tintin_uk 

Hi,

 

Thanks for your information.

 

In addition to check the lights, please also test the stability of the front end. You can refer to the troubleshooting steps here first.

Troubleshooting: Unstable connection on the TP-Link router

 

If all the advise above cannot help, please contact the local support team with the results with the troubleshooting steps.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#4
Options
14 Reply
Re:Archer AX55 Pro (v1) has become unreliable
2024-09-13 08:51:34

  @tintin_uk 

Hi,

 

You can change the DNS settings on the Archer AX55 Pro.

And please also use a wired device to test if the internet from the Virgin Media Hub 5 is stable or not.

 

If the issue still exists, please also check the Internet light on the AX55 Pro, is it green or red?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer AX55 Pro (v1) has become unreliable
2024-09-13 09:00:20
Thanks for the quick reply. To be clear, I already use the DNS settings for Coudflare (1.1.1.1 and 1.0.0.1.) Again, I've had this set consistently over the last year but the issue has only been over the last couple of months. The cable router does have a visual indication if there are issues (effectively a green light) and each time I've lost internet, this hasn't changed. However, I will check the connection next time. Admittedly, I've not paid attention to the lights on the router but again I will check this next time.
  0  
  0  
#3
Options
Re:Archer AX55 Pro (v1) has become unreliable-Solution
2024-09-14 03:33:56 - last edited 2024-09-29 01:32:43

  @tintin_uk 

Hi,

 

Thanks for your information.

 

In addition to check the lights, please also test the stability of the front end. You can refer to the troubleshooting steps here first.

Troubleshooting: Unstable connection on the TP-Link router

 

If all the advise above cannot help, please contact the local support team with the results with the troubleshooting steps.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#4
Options
Re:Archer AX55 Pro (v1) has become unreliable
2024-10-06 08:01:04 - last edited 2024-10-06 08:04:01

So the network went down again overnight last night.

 

You previously asked me to take a look at the lights on the AX55 Pro so I did this when I realised I had no network. I can confirm that the lights were off entirely. An explanation for this is that I use the scheduler to switch the lights off between 7pm and 7am every night. However, the local time when I inspected the router was 7:45am so they should have been on. This would suggest to me that the router 'crashed' - which caused the network to go down - and the router wasn't able to turn back the lights per the schedule as it usually would.

 

Again, I have only seen these issues since the release of v1.3.1.

 

Please advise me specifically how to progress a solution as this current situation is not acceptable.

 

Thanks,

TT.

  0  
  0  
#5
Options
Re:Archer AX55 Pro (v1) has become unreliable
2024-10-07 07:23:13

  @tintin_uk 

 

Router went down again last night. That's 2 days in a row now.

  0  
  0  
#6
Options
Re:Archer AX55 Pro (v1) has become unreliable
2024-10-26 10:57:19

  @tintin_uk 

Hi all, 

I'm not coming up with some solution, juts want to mention that I'm experiencing exactly same issue. 

My Archer AX55 pro gets disconnected from the network. 

It's usually happening over night but I've seen the cases when router got disconnected during a day. 

It's disconnecting almost every day. 

My devices are not getting disconnected from Wi-Fi, but indicating "No internet service". 

Internet cannot be accessed through Wi-Fi nor LAN. 

All lights on router are green except one - 2nd light from right (next to the USB light).

I'd like to mention that I have 2 same Arche AX55 pro and both indicates the same issue. 

 

After rebooting the router, all issues are fixed and router is running normally. 

 

I can provide the Logs details however I prefer to send it to directly except sharing it here.
I do not understand all details from the logs so I'm not sure what's starting the router to get stuck.

 

Regards

 

Jiri

  0  
  0  
#7
Options
Re:Archer AX55 Pro (v1) has become unreliable
2024-11-17 08:57:26

  @Jiri78 

 

Sorry to read that you're having issues too.

 

My router continues to disconnect at least once a week and always in the early hours of the morning.

 

I recently reset it back to its factory defaults and set it up again from scratch and it still crashed 3 days later.

 

At this point, I think I've had about enough. With no firmware update in sight I think its probably time to return it.

 

 

  0  
  0  
#8
Options
Re:Archer AX55 Pro (v1) has become unreliable
2024-11-19 08:15:51

 

tintin_uk wrote

  @Jiri78 

 

Sorry to read that you're having issues too.

 

My router continues to disconnect at least once a week and always in the early hours of the morning.

 

I recently reset it back to its factory defaults and set it up again from scratch and it still crashed 3 days later.

 

At this point, I think I've had about enough. With no firmware update in sight I think its probably time to return it.

 

 

 

@tintin_uk I'm sorry to hear that you're still encountering the disconnect issue.

 

Have you ever tested to temporarily disconnect the WPA8630P from the network, then observe if the AX55 will remain stable?

 

To assist and figure it out efficiently, I would like to forward your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up. Thank you.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#9
Options
Re:Archer AX55 Pro (v1) has become unreliable
2024-11-19 08:57:18

  @Kevin_Z 

 

Thanks for reaching out. 

 

To come back on your question, no, I haven't tried disconnecting the Powerlines; This is the first time its been suggested as a potential solution - although I would argue that even if it fixes the problem, its not the answer. The One Mesh system is why I purchased TP-Link equipment.

 

Although I'm keen to help identify the problem, it would be a bit of a pain to have to disconnect the Powerline for up to a week to see if the network falls over or not.

 

TT.

  0  
  0  
#10
Options
Re:Archer AX55 Pro (v1) has become unreliable
2024-11-19 09:00:26

 

Jiri78 wrote

  @tintin_uk 

Hi all, 

I'm not coming up with some solution, juts want to mention that I'm experiencing exactly same issue. 

My Archer AX55 pro gets disconnected from the network. 

It's usually happening over night but I've seen the cases when router got disconnected during a day. 

It's disconnecting almost every day. 

My devices are not getting disconnected from Wi-Fi, but indicating "No internet service". 

Internet cannot be accessed through Wi-Fi nor LAN. 

All lights on router are green except one - 2nd light from right (next to the USB light).

I'd like to mention that I have 2 same Arche AX55 pro and both indicates the same issue. 

 

After rebooting the router, all issues are fixed and router is running normally. 

 

I can provide the Logs details however I prefer to send it to directly except sharing it here.
I do not understand all details from the logs so I'm not sure what's starting the router to get stuck.

 

Regards

 

Jiri

 

@Jiri78 Can you please provide your network layout? Are there any EasyMesh extenders or satellite devices in the network?

 

If there are, please try removing those devices temporarily from the network and monitor the connectivity.

 

Is the 2nd light from right off or orange/red when the internet stops working on the AX55 Pro?

 

Who is your ISP, please? Thank you.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#11
Options