Does Deco X20-4G 1.0.4 Build 20240110 Rel. 51730 support the 'ping from WAN' feature?
I have a Deco X20-4G with firmware version 1.0.4 Build 20240110 Rel. 51730 and would like to enable the 'ping from WAN' feature.
If this model does not meet my needs, could you recommend another model that would be sufficient?
P.S. I am using a static IP SIM card.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks for the update.
I also checked the engineer. Deco X50-5G supports the on/off toggle of "ignore Ping from WAN" under Wireless router mode and 4G/5G router mode.
Deco X20-4G only has this feature under wireless router mode.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, welcome to the community.
May I know why you need to enable "ping from WAN"?
Currently, I notice there is only an on/off toggle for "ignore Ping from WAN" under wireless router mode. It is not available under 3G/4G router mode.
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
We would like to transmit images from our IP camera to our NAS using the FTP method, but we are encountering issues.
In our setup, the IP camera is connected to a PoE switch, which is then connected to a 4G router. We have tested the networking capabilities of the 4G router, and our NAS is functioning normally.
Thank you very much.
- Copy Link
- Report Inappropriate Content
Thanks for the update.
I also checked the engineer. Deco X50-5G supports the on/off toggle of "ignore Ping from WAN" under Wireless router mode and 4G/5G router mode.
Deco X20-4G only has this feature under wireless router mode.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 234
Replies: 3
Voters 0
No one has voted for it yet.