Home Network Community > Wi-Fi Routers > Archer C80 in Access Mode with static IP
< Wi-Fi Routers

Archer C80 in Access Mode with static IP

Archer C80 in Access Mode with static IP

Archer C80 in Access Mode with static IP
Archer C80 in Access Mode with static IP
2024-08-01 15:33:11 - last edited 2024-08-02 09:09:20
Tags: #Network Connectivity #Access Point Mode
Model: Archer C80  
Hardware Version: V2
Firmware Version: 1.13.2

Archer C80 configured as Access Point and Dynamic IP address (DHCP with IP reservation at DHCP Server) has unstable WiFi connections. Using fixed IP adddress fixes that but Archer C80 "thinks" there is no Internet access on the Network Map.

Enhancement Request: IP fixed address should allow both "default gateway" and "DNS Server" configuration to avoid this behavior.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Archer C80 in Access Mode with static IP-Solution
2024-08-01 18:55:58 - last edited 2024-10-15 17:41:05

  @MPH-RJ 

 

Here's an aexample of C80 in AP mode:

 

 

where 192.168.0.1 is tthe LAN IP address of your main router. C80 DHCP server should be disabled.

Make sure you're using C80 WAN (blue) port to connect to your main router LAN port.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
4 Reply
Re:Archer C80 in Access Mode with static IP-Solution
2024-08-01 18:55:58 - last edited 2024-10-15 17:41:05

  @MPH-RJ 

 

Here's an aexample of C80 in AP mode:

 

 

where 192.168.0.1 is tthe LAN IP address of your main router. C80 DHCP server should be disabled.

Make sure you're using C80 WAN (blue) port to connect to your main router LAN port.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
Re:Archer C80 in Access Mode with static IP
2024-08-02 09:12:19 - last edited 2024-08-02 09:12:55

  @MPH-RJ 

 

Hi, thanks for posting question here.

It is recommended to read this article to know more about the difference between wireless router mode and access point mode.

 

  @terziyski 

Appreciate your suggestions as well.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#3
Options
Re:Archer C80 in Access Mode with static IP
2024-10-15 13:43:23

  @terziyski - In our LAN the DNS traffic is restricted to our local DNS servers. We do not allow DNS traffic to traverse our firewall, hence the need to allow both IP Gateway and DNS server to be defined when using manual IP configuration.

 

Mauricio

  0  
  0  
#4
Options
Re:Archer C80 in Access Mode with static IP
2024-10-15 17:52:22

  @MPH-RJ 

 

It's probably best to request this feature here:

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 337

Replies: 4

Tags

Network Connectivity Access Point Mode
Related Articles
Archer C80. Should I use it in router mode or AP mode?
746 0
 Archer C80 in Access Mode with static IP - No DNS Server configuration option
88 0
 Archer C80 not working in access point mode
147 0
Constant Internet Disconnections on Access Mode on Archer C80
1535 2
 Disconnections on Archer C80 in AP mode
542 1
Archer C80-WDS or bridge mode
5532 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.