Intel AX210 Wi-Fi card does not detect 6ghz network after updating Archer AXE75 router firmware
Intel AX210 Wi-Fi card does not detect 6ghz network after updating Archer AXE75 router firmware
Just after upgrading the firmware on my Archer AXE75 v1.6 router to version 1.2.0 Build 20240320, my Intel AX210 Wi-Fi network card with the latest drivers (23.60.1.2), has stopped detecting the 6ghz network. I should mention that everything works normally with any previous firmware and I am currently running Windows 11 24H2.
I hope you can help me with this problem, thank you.
Re:Intel AX210 Wi-Fi card does not detect 6ghz network after updating Archer AXE75 router firmware
Go through this thread - it has been reported that the signal strength can cause this issue.
If that's not the case try changing the 6GHz wireless channel and test again:
Note: To be able to change the wireless channel of different bands the Smart Connect feature should be turned off.
If this was helpful click once on the arrow pointing upward.
If this solves your issue, click once the star to mark it as a "Recommended Solution".