IPV6 Firewall rules not work!!!
IPV6 Firewall rules not work!!!
I set it up but I can't access windows server from global network. please solve them.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Gents,
I worked with the techs to get the problem resolved - the beta firmware here: https://community.tp-link.com/en/home/forum/topic/682276?replyId=142700 fixes the issue. Not sure when it will be in the main channel, but it's working well, for a couple of months now
- Copy Link
- Report Inappropriate Content
Hi, thanks for posting question here.
Did you set up corresponding rules on the remote PC? You may verify it by turning off Firewall on the PC.
- Copy Link
- Report Inappropriate Content
@Marvin_S Before that I use old main other router, I can access server via IPv6 with microsoft remote desktop app from global network and local network. After that I setup Archer AXE75 to main rounter, I can't access server from global network but I can access server from local network.
please tell your team engineers check and test this feature on Archer AXE75 that is work or is not work. Because I use IPv6 firewall feature rule on Deco X90 that is work but It is not work on Archer AXE75.
thank for your care.
- Copy Link
- Report Inappropriate Content
Hi, thanks for your update.
It is still suggested to turn off Firewall on the PC to test. If the same issue, your case will be escalated to the support engineers for further analysis.
- Copy Link
- Report Inappropriate Content
@Marvin_S I have turned off Firewall on pc but I still can't RDP to pc from global network. please help me.
- Copy Link
- Report Inappropriate Content
Hi, we have reported the issue to the support engineers, they will likely reach out to you via email to continue to troubleshoot your issue. Please check your email box and confirm.
- Copy Link
- Report Inappropriate Content
@Marvin_S Yes, I got it. I have some question. Do you have thai language support? Thank you so much.
- Copy Link
- Report Inappropriate Content
Hi,
Did you get this working?
I am experiencing the same issue, only difference is I'm using Firmware Version: 1.2.1 Build 20240607 rel.74966(4555)
Unlike many other posts about IPv6 firewall, at least on this model it seems the feature exists, it just doesn't seem to work
- Copy Link
- Report Inappropriate Content
It’s not until now.
- Copy Link
- Report Inappropriate Content
Macka_ wrote
Hi,
Did you get this working?
I am experiencing the same issue, only difference is I'm using Firmware Version: 1.2.1 Build 20240607 rel.74966(4555)
Unlike many other posts about IPv6 firewall, at least on this model it seems the feature exists, it just doesn't seem to work
@Macka_ I checked the ticket record and it seems that DTW_Business didn't follow it up with our support engineers. He might discussed the issue with the local technicians but there is no result that we can check.
If you're willing to further investigate this issue further with our support engineers, could you please provide the following details? Thank you.
1. How did you check whether the IPv6 Firewall rules work or not? Please describe your network topo and requirement in detail so that we can understand it better.
2. If you are also trying to access a windows server from a global network just like DTW_Business, please check and ensure the Windows firewall is disabled first, then check again.
- Copy Link
- Report Inappropriate Content
Gents,
I worked with the techs to get the problem resolved - the beta firmware here: https://community.tp-link.com/en/home/forum/topic/682276?replyId=142700 fixes the issue. Not sure when it will be in the main channel, but it's working well, for a couple of months now
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 967
Replies: 11
Voters 0
No one has voted for it yet.