Archer AX21 v3.0 losing internet connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX21 v3.0 losing internet connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX21 v3.0 losing internet connection
Archer AX21 v3.0 losing internet connection
2024-05-28 23:42:52
Model: Archer AX21  
Hardware Version: V3
Firmware Version: 1.1.4 Build 20230219 rel.69802(5553)

My router is constantly losing internet connection, Im using it on access mode. The devices that are connected to the modem´s WIFI or via ethernet cable all work fine. I only lose connection on the router.

 

This is the system log of the last failure:

 

####################################################################
#                  Archer AX21 System Log
# Time = 2024-05-28 18:31:33
# H-Ver = 3.0.0 ; S-Ver = 1.1.4 Build 20230219 rel.69802
# LAN: I = 192.168.0.18 ; M = 255.255.255.0 ; MAC = 9C:53:22:56:64:C8 
# Clients connected: 17 ; WI-FI : 17 
####################################################################
2024-05-28 18:28:59 led-controller[1119]: <6> 288051 Start to run WAN1_ON
2024-05-28 18:28:59 led-controller[1119]: <6> 288051 Start to run WAN0_OFF
2024-05-28 18:28:59 led-controller[1119]: <6> 288051 Start to run LAN_OFF
2024-05-28 18:28:14 led-controller[1119]: <6> 288051 Start to run WAN1_ON
2024-05-28 18:28:14 led-controller[1119]: <6> 288051 Start to run WAN0_OFF
2024-05-28 18:28:14 led-controller[1119]: <6> 288051 Start to run LAN_OFF
 

I saw in some forums that using it with STATIC IP on and DHCP OFF would solve the problem but it hasnt.

  0      
  0      
#1
Options
1 Reply
Re:Archer AX21 v3.0 losing internet connection
2024-05-29 03:47:07

  @cemaldonador 

 

Hi,thanks for posting question on our community.

If you're experiencing unstable internet when your router is in Access Point (AP) mode, there are a few potential reasons and troubleshooting steps you can try:

    1. Check the network configuration: Ensure that the router is properly configured in AP mode. You could refer to this FAQ.

    2. Verify the connection between the router in AP mode and the main network: Ensure that the connection between your router in AP mode and the main network (e.g., modem or primary router) is stable. Make sure the Ethernet cable connecting the two devices is firmly plugged in and not damaged. Try using a different cable if possible.

    3. Check the IP address conflict: Verify that there are no IP address conflicts between the router in AP mode and other devices on the network. Ensure that the router's IP address is within the same subnet as the main network and that it doesn't conflict with any other device's IP address.

    4. Update firmware: Check if there are any firmware updates available for your router in AP mode.

    5. Consider channel interference: If only Wi-Fi connection to the router in AP mode is unstable, there may be interference from neighboring networks operating on the same channel. Access the router's administration interface and try changing the wireless channel to a less congested one.

  0  
  0  
#2
Options