Home Network Community > Feature Request (Routers) > AX55 V2.0 Easymesh implementation
< Feature Request (Routers)
 
2
Votes

Implemented AX55 V2.0 Easymesh implementation

12
 
2
Votes

Implemented AX55 V2.0 Easymesh implementation

ImplementedAX55 V2.0 Easymesh implementation
AX55 V2.0 Easymesh implementation
2024-05-25 11:18:00 - last edited 2024-10-18 10:55:06
Model: Archer AX55  
Hardware Version: V2
Firmware Version: AX55(US)_V2_1.1.0 Build 20230128

Dear Community,

 

Recently, I upgraded my main router from an AX23 to an AX55(US) V2.0 and decided to set up the AX23(EU) V1.2 as a OneMesh satellite wireless repeater.

I spent many hours trying to configure my AX23 as a OneMesh satellite repeater. It was a difficult task because there was no “add device” button in the AX55 OneMesh interface. It is strange that the AX23 has this option available, but my AX55, which I consider a “better” router, does not. Both routers have the latest firmware versions installed, and Smart Connect is enabled.

 

After watching some videos, I found an alternate method to set it up:

  1. Set up the AX23 in the OneMesh tab as a wireless satellite repeater.
  2. Press the WPS button on the AX55 (router) for just 1 second (pressing it longer turns WiFi off).
  3. Press the WPS button on the AX23 (repeater) for just 1 second (pressing it longer turns WiFi off).
  4. The link/pairing process should start, and the AX23 will show in theAX55 as a OneMesh device.

 

This workaround is not very user-friendly…

 

It is stange that Easymesh is only supported in V1 and V4 but not in V2 and V3 AX55 versions.

 

Will really appreciate if Easymesh is implemented in V2 AX55 router.

 

Cheers! Mat

#1
Options
1 Accepted Solution
Re:AX55 V2.0 Easymesh implementation-Solution
2024-10-18 10:55:03 - last edited 2024-10-18 10:55:06

@Mat_arg  @ImJuju  @wind01 

 

I'm excited to inform you that Archer AX55 V2 has a pre-release firmware that supports EasyMesh and Ethernet Backhaul now. 

 

Please check this thread for more details:

Archer AX55 V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, and More

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
#12
Options
12 Reply
Re:AX55(US) V2.0 Onemesh Setup Issues
2024-05-25 13:36:20 - last edited 2024-05-27 09:16:21

  @Mat_arg 

 

Hi,

 

Apparently the Archer AX55 V2 is not planned to receive support for "EasyMesh". Therefore you will unfortunately have to stick with "OneMesh" and use the workaround you illustrated.

 

https://www.tp-link.com/en/easymesh/product-list/#wi-fi-routers

 

 

... and there will be no "Ethernet Backhaul" for OneMesh.

#2
Options
Re:AX55(US) V2.0 Onemesh Setup Issues
2024-05-25 17:01:45 - last edited 2024-05-27 09:16:21

@woozle this is very disappointing news. I recently bought a new router and discovered it has fewer capabilities than I expected. I believe TP-Link's strategy of only supporting some versions of the same product is terrible. Why call it the same product name if customers have to "investigate" the individual version's capabilities? All versions should have the same capabilities!

 

Unfortunately, this makes me reconsider if TP-Link is the brand I want to use, and I am thinking about returning my AX-55 router.

 

Regards, Mat

#3
Options
Re:AX55(US) V2.0 Onemesh Setup Issues
2024-05-27 09:16:03 - last edited 2024-05-27 09:16:22

  @Mat_arg 

 

Hello, thank you for posting on the TP-Link community, and we certainly appreciate all your feedback and feature request(s) here.

While we don't have any specific details that I can share around if the feature of support Easymesh on Archer AX55 V2 can come to your home router, or when it might, I'll make sure to log this feature request and pass it along to the team.

I'm moving this conversation into the ‘Feature Request (Routers)' area and tagging it as a ‘Future Consideration’ for better visibility.

Feel free to let us know of any other feature requests you may have, we’d be happy to send them up for you.

 

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
#4
Options
Re:AX55(US) V2.0 Onemesh Setup Issues
2024-05-27 10:26:37

 Thank you @Marvin_S !

 

Yes, it would be a great feature to support EasyMesh in V2.0 as well.

 

ECO Mode would also be a great feature, but I don't know if it is possible in this model.

 

How much time might these implementations take?

 

Regards,

Mat

#5
Options
RE:AX55(US) V2.0 Onemesh Setup Issues
2024-05-28 15:26:30
Only V1 and V4 supports Easymesh. All versions should have this feature, including V2 and V3
#6
Options
RE:AX55 V2.0 Easymesh implementation
2024-06-20 10:08:21
THIS WILL BE OF BIGHELP TO THOSE WHO EXPECTED THAT IT CAN MESH. Apparently,the sellers on my local store didnt even tell me of this feature, or rather what feature it doesnt have. The Ax12 which i think is a smaller router has Easymesh. Why cant this bigger and more pricey router not have the Easymesh. I dont think it should matter what hardware version it is. 😅🥲 Pls dev team. I chose TPlink bec i think your routers' mesh system can do better .
#7
Options
RE:AX55 V2.0 Easymesh implementation
2024-10-08 16:37:33
Any updates? Even without wired backhaul, wireless easymesh will do if that shorten your development time. Willing to try out beta too. Just wanting a simple easymesh as I got 2 other router easymesh capable.
#8
Options
Re:AX55 V2.0 Easymesh implementation
2024-10-08 17:19:42

  @Mat_arg Unfortunately, we haven't received any updates regarding the implementation of this feature on the AX55 V2 routers, and we are unsure if it will ever be implemented. It's a shame that TP-Link's strategy seems to exclude users of the V2 and V3 versions from this functionality.

#9
Options
Re:AX55 V2.0 Easymesh implementation
2024-10-09 10:31:12
Being a big company, I think if you support a model, you must support all the version in the model. You can exclude a model if you want to. But once you support a model, it should be all version regardless. It's easier for the consumer to understand & take note. No confusion. Either can or cannot.
#10
Options
Re:AX55 V2.0 Easymesh implementation
2024-10-09 10:45:11

  @wind01 Exactly, it’s unfair that the SAME MODEL offers different functionalities. Why give it the same name if it can't perform the same? In a world where full WiFi coverage is essential for homes, it’s completely unreasonable for the SAME MODEL to have versions with OneMesh and others without. It’s also very difficult to find specific versions of the product, and often even the sellers don’t know the differences. This can lead to returning products simply because they aren’t the version you need. I’ll seriously reconsider whether TP-Link’s policies meet my needs if I have to investigate each product version in detail every time I make a purchase.

#11
Options
12

Information

Helpful: 2

Views: 1267

Replies: 12

Voters 2

voter's avatar
voter's avatar
Related Request
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.