Official Release New Firmware for Archer AX55 V1 Supports DoH&DoT, ECO Mode, EasyMesh in AP Mode and More
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Update:
Let's move to new thread of Pre-release Firmware for Archer AX55 V1 1.3.3 to experience newer features and optimizations!
1.3.3 version still contains all update in this thread.
Hello Everyone,
We're thrilled to announce the release of new official firmware for Archer AX55(US) V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, DoH&DoT, ECO Mode, etc. We encourage you to upgrade firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
Download Link:
Archer AX55(US)_V1_1.3.2 Build 20240325
Note: This firmware cannot be degraded to the previous version.
New Features/Enhancements
1.Add support for ECO mode ( on Advanced->System->ECO Mode page).
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
2.Add support for DoH/DoT(on Advanced->Network->Internet page).
3.Add Tap Mode in OpenVPN Server(on Advanced->VPN Sever ->OpenVPN page).
TAP mode, short for "Ethernet Bridging" is a network technology that enables the bridging of two or more network segments into one virtual network. With the integration of TAP mode into your OpenVPN server, your AX55 router now has the ability to work as a bridge between multiple local networks, creating a seamless and unified network experience.
Welcome to explore more from Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully.
4.Add quick setup for third-party VPN in VPN Client feature(including Surfshark and NordVPN)
Here are the related FAQs:
How to Install Surfshark VPN on TP-Link Wireless Routers
How to Install NordVPN on TP-Link Wireless Routers
5.Add support for multiple selection in whitelist.
6.Add support for EasyMesh in AP mode.
7.Add support for EasyMesh Network via Ethernet Backhaul.
8.Enhance EasyMesh Satellite Router Management via satellite router web interface.
- Add Reboot option
-
Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
- LED Control
9.Add isolation of Guest Network and Main Network in AP mode.
10.Add Language options on the top of the web interface.
11.Add support for multi-device upgrade.
12.Optimize USB sharing, now the secure sharing is enabled by default.
13.Enhance Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
14.Enhance system stability.
Related Article
Pre-release Firmware for Archer AX55 V1 1.3.3 Brings a Host of New Features and Optimizations
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Introducing ECO Mode for Archer Router
What is DoH and How to use it on TP-Link Wi-Fi Routers?
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
hi any news for the AX55 pro ?
phil
- Copy Link
- Report Inappropriate Content
@Pbranly no, unfortunately. I've manually tried the 1.26.x firmware from the other closed post, but it was not recognized by the AX55 Pro router, sadly
- Copy Link
- Report Inappropriate Content
inieto wrote
@Pbranly no, unfortunately. I've manually tried the 1.26.x firmware from the other closed post, but it was not recognized by the AX55 Pro router, sadly
https://community.tp-link.com/en/home/forum/topic/593722?replyId=1373178
This is our only hope. I feel cheated. On the https://www.tp-link.com/pl/easymesh/product-list/ site, the AX55 PRO (V1) is labeled as having ethernet backhaul support. In addition, I wrote to support and they wrote that it has support. When I bought it and connected it at home, it turned out that there is no ethernet backhaul. With my two Archer C6 v4 tries to communicate wirelessly. And it works absolutely terribly!
- Copy Link
- Report Inappropriate Content
@Marvin_S How long AX55 V1 (EU) get update new firmware
- Copy Link
- Report Inappropriate Content
@Marvin_S Hi, is this update usable for AX53 v1.0 US version?
- Copy Link
- Report Inappropriate Content
Hey @Marvin_S
Currently i have two AX55 using the Beta version which i installed for the ethernet backhaul.
If i update the firmware on the main router, does the satellite router update automatically as well? if not, does the satellite router still able to join to the main router after update?
Or what is the correct steps to update both of the router?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, if you update firmware of main router, the firmware of satellite router will not update automatically.
Via the web UI page of main router, you can update firmware of satellite router under Advanced > Easymesh page or Advanced > System Tools > Firmware Update.
That should not affect the connection of Easymesh network.
- Copy Link
- Report Inappropriate Content
@AF63 If you manually flash this version (1.3.2 Build 20240325 rel.56896) it also works fine on the EU hardware version 
- Copy Link
- Report Inappropriate Content
@Connos This won't work
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 8499
Replies: 38
Voters 0
No one has voted for it yet.