Official Release Deco X50-5G 1.1.5 with Bridge Mode and Cell Lock
This Article Applied to
Deco X50-5G_V1
Firmware Download Link:
Deco X50-5G_V1_1.1.5_Build_20240419
Modifications and Bug Fixes:
1. Add Bridge Mode.
2. Support Cell Lock.
3. Support displaying more connection details about 4G/5G signal status, like Cell ID/PCI/ARFCN.
4. Fixed the issue that SMS cannot be sent properly in some areas.
5. Enhanced network stability.
Note:
1. The current network configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
2. Please make sure the Deco APP is up-to-date.
FAQs
Q1: How to use Cell Lock on the Deco X50-5G?
Sometimes Deco X50-5G might be switching between different Band combinations, Cell Lock helps to manually set Deco X50-5G to the desired band combination to improve the network speed and stability.
Cell Lock is supported for 4G and 5G respectively. It is under Deco APP>More>Internet>Cell Lock.
To enable it, you need to enter ARFCN (EARFCN for 4G and NRARFCN for 5G) and the corresponding PCI of the desired LTE/5G Cell, which can be found under Deco APP>More>Internet.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello,
So i did the firmware rollback to 1.1.3 and i got B1+N78 in Auto Band.
But i would like to have the option to manually select what bands i want, that i don't have in this firmware.
Now with the ticket of engenier support am i suppost to wayt for contact?
Many thanks for the support.
- Copy Link
- Report Inappropriate Content
@David-TP Hi David,
are there any news when Eco Mode / Wi-Fi schedule will be released for Deco X50-5G?
I want to turn off Wi-Fi during bedtime near our kids' bedrooms.
Kind regards
Dennis
- Copy Link
- Report Inappropriate Content
@David-TP Does bridge mode mean that WiFi on the X50-5G is (or can be) switched off?
- Copy Link
- Report Inappropriate Content
@David-TP can you say if the X50 5G router should work with external 4G antenna through the male RP SMA connectors? I am having problem to turn on the external antenna option under the external antenna part of the "more" menu having completed the connection to the SMA connectors. I am not sure I am following how to connect this device to "the Deco WiFi network first". Does that mean switch it out of the 4G/5G operation?
- Copy Link
- Report Inappropriate Content
Hi, you just have to turn the slider on, the router will no longer work with internal antenas, will utilize the external, im on 1.1.3 firmware.
Make sure the external antena is 5g compatible in order to get the 5g signal.
- Copy Link
- Report Inappropriate Content
@David-TP I have bought a Deco X50-5G from Amazon so I can answer my questions about bridge mode, Wifi remains on in Bridge mode to provide remote control of the Deco (and to interfere with your existing Wifi network). Maybe this could be changed by a firmware update? No, because firmware updates are not available in bridge mode! My Deco X50-5G will be going straight back to Amazon.
- Copy Link
- Report Inappropriate Content
@David-TP hey, will it ever be possible to change the DNS Servers for WAN/IP on the Deco x50-5g?
right now its only possible to set DHCP DNS
- Copy Link
- Report Inappropriate Content
@David-TP Think i might just use this over priced 5G mesh bridged into an Omada TL-605 and just use the WiFi 6 Mesh capability, run my fibre connection straight into WAN on TL-605 and and have the 5G on the X50 5G for when fibre goes down. I assume this will work fine as long as i can still get access via Open VPN to access my mesh system via the Deco app?
- Copy Link
- Report Inappropriate Content
Hi, I'm afraid Deco X50-5G still doesn't support changing the WAN/iPv4 DNS under 4G/5G router mode.
Thank you very much and Best regards.
- Copy Link
- Report Inappropriate Content
Hi, I'm a little curious of how you plan to connect Deco to the ER605. Is it like:
Do you plan to set Link failover on the ER605, for example: https://www.tp-link.com/en/support/faq/2133/
And Deco X50-5G doesn't support VPN server/client yet. So I suppose you would set the VPN on the ER605?
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 8186
Replies: 43
Voters 0
No one has voted for it yet.