Home Network Community > Deco > Adding a "cheap" deco to extend my network
< Deco

Adding a "cheap" deco to extend my network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Adding a "cheap" deco to extend my network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Adding a "cheap" deco to extend my network
Adding a "cheap" deco to extend my network
2024-05-08 22:15:20 - last edited 2024-05-09 09:45:00
Model: Deco XE75  
Hardware Version: V1
Firmware Version: 1.2.5

Hopefully a straightforward question smiley

 

I have two XE75s one on the ground floor and one on the first. I want to move my NAS to the top floor above the first. However I cant supply it with ethernet via a cable from the first floor. I was thinking I could install a cheaper end Deco up there, connect to my network via WiFi then cable from the node to the NAS with a Cat 6. So far so good ?

 

I guess if thats technically OK will any WiFi 5 or 6 Deco do ?

 

Thank you

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Adding a "cheap" deco to extend my network-Solution
2024-05-09 05:44:27 - last edited 2024-05-09 09:45:00

  @topgazza2 

Hi, yes, any Deco(except Deco M3W which doesn't have an Ethernet port) could help with that.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:Adding a "cheap" deco to extend my network-Solution
2024-05-09 05:44:27 - last edited 2024-05-09 09:45:00

  @topgazza2 

Hi, yes, any Deco(except Deco M3W which doesn't have an Ethernet port) could help with that.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
Recommended Solution
  1  
  1  
#2
Options
Re:Adding a "cheap" deco to extend my network
2024-05-09 09:44:46

  @David-TP 

 

Thank you David

 

I was considering a Deco M5 or similar. Something simple

  0  
  0  
#3
Options
Re:Adding a "cheap" deco to extend my network
2024-05-09 14:47:55

topgazza2 wrote

  @David-TP 

 

 

I was considering a Deco M5 or similar. Something simple

  @topgazza2 

 

Consider M5 if you are OK with WiFi5 Deco unit, or X55/X50 for WiFi6.

 

With your setup, you may need Connection Preference feature to make sure top floor Deco connects to first floor Deco and not to ground floor Deco. Not every Deco model has that feature, especially among older and cheaper WiFi5 Deco models only M5 and M9 Plus have it for sure.

With WiFi6 Decos it is the same story, but X50 or X55 should have that feature.

  1  
  1  
#4
Options

Information

Helpful: 0

Views: 433

Replies: 3

Related Articles
Deco extend existing Wi-Fi network
927 0
Adding a Deco E4 to an M4 network
85 0
Adding Deco X50 to existing Deco M4 network
2907 0
Adding a Deco X50 to my E7 mesh network
57 0
 Extend Deco P9 network
197 0
Adding to av600 network
1054 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.