Add EasyMesh to ARCHER AXE75
Add EasyMesh to ARCHER AXE75
As one of many people who were deceived by marketing cr*p of OneMesh feature on ARCHER AXE75 router (that does not work in AP mode, nor Router1>Router2 mode), I hereby suggest adding at least EasyMesh support for this overpriced router.
Bought two identical units of ARCHER AXE75 connected via Ethernet cable LAN to LAN (or LAN to WAN) port and unable to roam seamlessly between two routers with my portable devices.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
SOLVED
firmware: 1.2.0 Build 20240320 rel.74722(4555)
New Features/Enhancement:
1. Add the Easymesh function,
2. Improve the client list function,
3. Add the IoT network and Device Isolation function,
4. Add the WireGuard VPN Server&Client function,
5. Add the function that getting the configuration from the old router in Quick
Setup,
6. Add the Time Control and Bandwidth Control on the Guest Network,
7. Enhance the Wireless setting security,
8. Improve the IPTV/VLAN function, allow the IPTV do not use the tag,
9. Improve the mail system log and passwore recovery function,
10. Add the IPV6 setting on the Tehter,
11. Add the function to limit the device's network speed,
12. Add the encryption function of the Guest Network Captive Portal,
13. Add the TP-Link ID, Access control function on the AP mode.
Bug Fixed:
1. Fixed the bug that the smart connection occasionally turns itself off,
2. Fixed the bug that the Address Reservation can't show all the clients,
3. Fixed the bug that the first time set the time zone in the Quick Setup and
probability Daylight saving Time cannot be automatically turned on and off,
4. Fixed the bug that the mesh device cannot be ethernet backhual with the router
when it works in AP mode and is connected to a LAN port,
5. Fixed the bug that the mail system log can't be sent from Microsoft Mailbox.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
SOLVED
firmware: 1.2.0 Build 20240320 rel.74722(4555)
New Features/Enhancement:
1. Add the Easymesh function,
2. Improve the client list function,
3. Add the IoT network and Device Isolation function,
4. Add the WireGuard VPN Server&Client function,
5. Add the function that getting the configuration from the old router in Quick
Setup,
6. Add the Time Control and Bandwidth Control on the Guest Network,
7. Enhance the Wireless setting security,
8. Improve the IPTV/VLAN function, allow the IPTV do not use the tag,
9. Improve the mail system log and passwore recovery function,
10. Add the IPV6 setting on the Tehter,
11. Add the function to limit the device's network speed,
12. Add the encryption function of the Guest Network Captive Portal,
13. Add the TP-Link ID, Access control function on the AP mode.
Bug Fixed:
1. Fixed the bug that the smart connection occasionally turns itself off,
2. Fixed the bug that the Address Reservation can't show all the clients,
3. Fixed the bug that the first time set the time zone in the Quick Setup and
probability Daylight saving Time cannot be automatically turned on and off,
4. Fixed the bug that the mesh device cannot be ethernet backhual with the router
when it works in AP mode and is connected to a LAN port,
5. Fixed the bug that the mail system log can't be sent from Microsoft Mailbox.
- Copy Link
- Report Inappropriate Content
@hWmMzIfYNRISEgn can you please tell me from where can i download this firmware V1.2.0 ? Tplink support page does not show it yet.
- Copy Link
- Report Inappropriate Content
@hWmMzIfYNRISEgn i checked on tether app too. It's not showing in my case.
- Copy Link
- Report Inappropriate Content
@Mr_Geek TP-Link support page is far behind apes. they do not manage and update it immediately after release, so it can take 1-2 weeks to show.
I got it from Tether app, but now it is also available at: https://www.tp-link.com/en/support/download/archer-axe75/#Firmware
- Copy Link
- Report Inappropriate Content
@hWmMzIfYNRISEgn ok got it thanks buddy, but one more thing i have US version model and update is not available on US support page. Should I wait for the official update or can I just manually update EU version. Will it cause any issue?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@hWmMzIfYNRISEgn Thanks buddy, yes! you are right I think it's better to wait for the release on US support page. Official page states that US and EU have different hardware.
- Copy Link
- Report Inappropriate Content
@Marvin_S is that true? is hardware v1.0 (EU) different from v1.0 (US) ?
- Copy Link
- Report Inappropriate Content
@hWmMzIfYNRISEgn Even i am surprised little bit. Here is some more SS. @Marvin_S Can you please verify. Is it true?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 1764
Replies: 12