Extensor have a problem whit FireWall
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Extensor have a problem whit FireWall
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Since it works I have had network problems with my router, since now my computer via Lan cable does not recognize the network and identifies it every 5 seconds. I also checked that if I disable the Wi-Fi on my router the problem disappears so I think it is the extender or some firewall configuration
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I have this error now, after all configurations. It was going well but today they accidentally reset the repeater and I tried. configure everything. again and I can't anymore
- Copy Link
- Report Inappropriate Content
Your TL-WA850RE DHCP server is turned off in the current configuration. You won't be able to connect to the TL-WA850RE if it's not connected to the main router.
To access the TL-WA850RE (192.168.0.254) connect to its LAN port with a PC (with static IP address - 192.168.0.252).
Open a web browser and point it to http://192.168.0.254 to get to the TL-WA850RE WebGUI and login.
If that still doesn't work for you, I would reset the TL-WA850RE - press the reset button for about 10 seconds and start from scratch using the directions I posted.
- Copy Link
- Report Inappropriate Content
I restarted the repeater after 10 seconds and it is now connected to my router but it no longer lets me set the IP 192.168.0.254 HDCP is in auto too
- Copy Link
- Report Inappropriate Content
Look at my post $4 the RE gateway IP address is your main router LAN IP address, i..e 192.168.0.1 (if you use the 192.168.0.0/24 subnet).
Once you set the RE with static IP address successfully, switch its DHCP server to Off.
When you configure the RE successfully and everything works as expected make a configuration back - details.
Thus, if anyone reset your RE, you'll always be able to restore its configuration to the current using the backup file.
- Copy Link
- Report Inappropriate Content
What happens is that the technician factory reset the main Router again, now the IP that appears before configuring the LAN of the Repeater, this appears:
- Copy Link
- Report Inappropriate Content
That means the technician changed your router LAN IP address subnet to 192.168.1.0/24, i.e your router has LAN IP address 192.168.1.254.
Do you have access to your router web management - it's important to know what's its DHCP server pool range in this case.
- Copy Link
- Report Inappropriate Content
I don't have access to the web administration of my router, but I do know that the ipv4 address of my main router connected to a PC is 192.168.1.54 and the default gateway is 192.168.1.254
- Copy Link
- Report Inappropriate Content
If you don't have access to your router web management use the following IP address for the RE 192.168.1.253 (Direccion IP).
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1380
Replies: 20
Voters 0
No one has voted for it yet.