AGAIN openVPN doesnt work
Hi i would like to use openVPN on this router.
My actual setup that doesnt work
with this i can connect to my vpn but i cant connect to local network or internet throughth vpn
my routing table
any suggestion why this setup doesnt work?
Thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
I noticed that your WAN interface is connected to a network using private IP addresses.
Is the VPN client located inside that 10.x.x.x network?
Or have you setup port forwarding on the network router of the 10.x.x.x network so that you can connect to your AX6000 via the Internet?
- Copy Link
- Report Inappropriate Content
Hi thanks for reply
this is my network
Now i can connect directly to AX6600 from internet when allow administration from internet.
When i connect to VPN from internet i cant see any problem and i got internal VPN ip address.
But from this point when i get vpn ip address i cant access internet or internal network
- Copy Link
- Report Inappropriate Content
That is indeed weird.
I've had three different Archer routers with OpenVPN server and it always worked fine with the default settings.
I also cannot find any other posts of users mentioning problems with the OpenVPN server of the Archer GX90. (that's the model name of your AX6600 router, isn't it?)
As a last resort you could test if things improve after performing a full "Factory Restore" on the router. Best would be to configure only the Internet connection settings of the router and then continue straight with the OpenVPN server's setup and testing.
To reduce the effort of bringing the router back to it's previous state in case the factory restore doesn't improve anything with regards to the OpenVPN server, you should first do a "Backup" of the router's present settings and later you can then "Restore" the old settings using the backup file.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 333
Replies: 3
Voters 0
No one has voted for it yet.