Home Network Community > Access Points > multi SSID not working when using VLAN
< Access Points

multi SSID not working when using VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

multi SSID not working when using VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
multi SSID not working when using VLAN
multi SSID not working when using VLAN
2024-03-09 12:01:36 - last edited 2024-03-09 12:41:01
Tags: #Multi-SSID #Network Connectivity #Installation #VLAN
Model: TL-WA1201  
Hardware Version: V3
Firmware Version: 1.10.33 Build 240115 Rel.65252n(4555)

We got Fiber (finally) and bought a Router from "Deutsche Telekom" called "Digitalisierungsbox Premium 2". We have 2 locations (1 = house, 2 = company). Router is located in the house. House and Company are connected via LAN. I bought two TL-WA1201:

 

My configuration:

AP House:

SSID 1 - Private

SSID 2 - PrivateGuests

AP Company:

SSID 1 - Private

SSID 2 - PrivateGuests

SSID 3 - CompanyCustomers

 

Everything worked like a charm until I checked on the IP adresses. No matter the SSID everyone is having the same subnet. Which means customers and guests can see other devices on the network. I added the VLAN configuration:

 

My configuration:

AP House:

SSID 1 - Private - VLAN 1

SSID 2 - PrivateGuests - VLAN 20

AP Company:

SSID 1 - Private - VLAN 1

SSID 2 - PrivateGuests - VLAN 20

SSID 3 - CompanyCustomers - VLAN 30

 

SSID 1 works fine. I get 192.168.2.x IP adress and I have access to my network + internet.

 

Reading this AP is multiSSID capable using VLANs, I assumed based on your SSID you having different IP adresses. This seems not to be the case. Since VLAN is activated SSID 2 and 3 is gettting 169.254.x..


The router does not have VLAN functionality.

  0      
 
  0      
 
#1
Options
7 Reply
Re:multi SSID not working when using VLAN
2024-03-09 13:09:59

  @Yaerox 

 

TL-WA1201 is just an access point, it doesn't have any routing capabilities.

To be able to use TL-WA1201 in multi-SSID mode you need a router that is VLAN capable.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:multi SSID not working when using VLAN
2024-03-09 13:13:53
The Router itself does not support VLANs. Would it be enough to put ROUTER -> VLAN SWITCH -> AP Because I have a VLAN Switch (TL-SG1016PE) available.
  0  
  0  
#3
Options
Re:multi SSID not working when using VLAN
2024-03-09 13:18:54

  @Yaerox 

 

I doubt that, but you could test and check if it will work in your case.

Here's guide on how to configure VLANs on your easysmart switch.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:multi SSID not working when using VLAN
2024-03-09 13:30:53 - last edited 2024-03-09 13:31:59

  @terziyski 

 

I tried this with 

 

VLAN ID VLAN Name Member Ports Tagged Ports Untagged Ports Delete
1 Private 1-16 7,15 1-6,8-14,16
20 PrivateGuest 7,15 7,15  
30 CompanyCustomer 7,15 7,15

 

Port 15 is where the Switch is connected to my Router.

Port 7 is there the AP is connected to my switch.

 

No matter which SSID I always get the 169.254.x.x address. 

  0  
  0  
#5
Options
Re:multi SSID not working when using VLAN
2024-03-09 13:35:12 - last edited 2024-03-09 13:37:05

  @Yaerox 

 

Yep, that's what I thought it will happen. For this setup you'll need a VLAN capable router like this one.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options
Re:multi SSID not working when using VLAN
2024-03-09 13:58:08

  @terziyski 

 

Thank you for your quick replies. We took the Telekom Trash Router because it has an integraded Telephone System which has all features we need now and in the future. I have to see if the Trashbox will work if we use a different router before. But I have in mind that using the Trashbox without it's routing funktion will automatically disable all telephone functionality...I guess I have to do some more research.

  0  
  0  
#7
Options
Re:multi SSID not working when using VLAN
2024-03-09 14:37:32

  @Yaerox 

 

For that matter it's probably the best to consult with your ISP before take an action changing the router.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 811

Replies: 7

Tags

Multi-SSID Network Connectivity Installation
VLAN
Related Articles
TL-WA1201 multi-SSID unreliable/unusable
10946 0
 TL-WA1201 5gHz not working in multi-SSID mode
1014 0
 VLANs / Multi SSID with WA1201 - Wifi not connecting for VLAN ID other than 1
1316 0
 Long delay in DHCP request using Multi SSID with VLANS
1299 0
TL-WA1201 Disconnect/reboots while opening tplink vigi app
1083 0
How to setup Multi SSID
630 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.