Home Network Community > Adapters > TX20UH USB disconnects when trying to connect to wifi
< Adapters

TX20UH USB disconnects when trying to connect to wifi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TX20UH USB disconnects when trying to connect to wifi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TX20UH USB disconnects when trying to connect to wifi
TX20UH USB disconnects when trying to connect to wifi
2024-02-27 12:17:32 - last edited 2024-02-29 00:58:27
Tags: #Highlighted Thread
Model: Archer TX20UH  
Hardware Version: V1
Firmware Version:

I tried to connect the TX20UH today, to use with the new Fibre BB I have. 

 

I can install the drivers and connect it, it finds all available wifi's and when I connect to mine it will connect, then the USB starts to disconnect

 

Windows makes the USB disconnected sound and the light goes off the unit ,then it reconnects and rinse and repeat. 

 

This goes on and on. THe USB socket is fine, the T9UH is in there now working fine. 

 

I think this is a bad driver , but the support cannot help me. 

 

Anyone else managed to get this to work ? 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:TX20UH USB disconnects when trying to connect to wifi-Solution
2024-02-28 07:55:01 - last edited 2024-02-29 00:58:27

  @woozle No it's not the socket , it turns out it's the drivers.

 

I had to uninstall hidden devices, which was the T9UH that I had previously, the drivers were clashing with each other.

 

When I remove them both and then just install the drivers for the TX20UH  it works fine.

 

TP LINK Need to do 2 things, 

 

1) Update their drivers for this unit, its clearly not working properly

2) provide an uninstall tool for all previous TP Link driver installations. 

 

Support were useless and they were once before with routers, I am losing all faith with TP Link now, going to have to think about going to a different company. 

Recommended Solution
  2  
  2  
#3
Options
2 Reply
Re:TX20UH USB disconnects when trying to connect to wifi
2024-02-27 21:19:28

  @LeVzi 

 

Hi,

 

If your computer has USB 2.0 sockets, then plug the TX20UH into one of those. It should work fine in a USB 2.0 socket, but your download speeds will be limited less than 300 Mbps.

 

If this is a desktop computer with many USB 3.x sockets and using an AMD Ryzen CPU, then test all of them. On Ryzen systems some USB ports are usually wired to the CPU and some to the chipset and one or the other may give different results.

 

  0  
  0  
#2
Options
Re:TX20UH USB disconnects when trying to connect to wifi-Solution
2024-02-28 07:55:01 - last edited 2024-02-29 00:58:27

  @woozle No it's not the socket , it turns out it's the drivers.

 

I had to uninstall hidden devices, which was the T9UH that I had previously, the drivers were clashing with each other.

 

When I remove them both and then just install the drivers for the TX20UH  it works fine.

 

TP LINK Need to do 2 things, 

 

1) Update their drivers for this unit, its clearly not working properly

2) provide an uninstall tool for all previous TP Link driver installations. 

 

Support were useless and they were once before with routers, I am losing all faith with TP Link now, going to have to think about going to a different company. 

Recommended Solution
  2  
  2  
#3
Options

Information

Helpful: 0

Views: 1042

Replies: 2

Tags

Highlighted Thread
Related Articles
 Frequent disconnects or spikes in hop delays 300+ ms on tx20uh wireless adapter
111 1
 TP-Link Archer TX20UH cannot connect 5ghz network
2385 0
 TP-link Archer TX20UH Wi-Fi Disconnect often
976 2
TP-Link Archer TX20UH does not detect 5GHz Wifi on Windows 11
365 0
 Ping lag and dropped packets with TX20UH windows
971 3
 Whats the difference between Archer TX20U Plus and Archer TX20UH
4256 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.