Port forward not working / Stopped working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Port forward not working / Stopped working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Port forward not working / Stopped working
Port forward not working / Stopped working
2024-02-01 12:46:36 - last edited 2024-02-27 09:59:25
Model: Archer MR600  
Hardware Version: V2
Firmware Version: Firmware Version:1.3.0 0.9.1 v0001.0 Build 210208 Rel.61056n

Hi,

I have a problem with accessing cameras on a network in my summer house. I have used the MR600 for about 2 years and it has been working perfectly but now it suddenly stopped working and it's seemingly impossible to access any port despite having the port forward set up.

 

  • I'm testing via https://www.yougetsignal.com/tools/open-ports/
  • I'm on a swedish mobile network called Tele2.
  • I've turned of the firewall for both ipv4 and ipv6 while trying.

 

Have anyone seen this happen or are experiencing the same issue?

 

 

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Port forward not working / Stopped working-Solution
2024-02-01 14:40:26 - last edited 2024-02-27 09:59:25

  @Christoffer-Swe 

 

Is it possible that your ISP has changed your internat IP address.

Sometimes ISPs are using CG-NAT in their networks for saving IPv4 address space.

You can check that here:

 

 

By the way, your are three FW releases behind the current one - here.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Port forward not working / Stopped working-Solution
2024-02-01 14:40:26 - last edited 2024-02-27 09:59:25

  @Christoffer-Swe 

 

Is it possible that your ISP has changed your internat IP address.

Sometimes ISPs are using CG-NAT in their networks for saving IPv4 address space.

You can check that here:

 

 

By the way, your are three FW releases behind the current one - here.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options