Archer C20 (US) router stuck after firmware update through TFTP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C20 (US) router stuck after firmware update through TFTP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C20 (US) router stuck after firmware update through TFTP
Archer C20 (US) router stuck after firmware update through TFTP
2024-01-23 07:32:39
Model: Archer C20  
Hardware Version: V5
Firmware Version:

Initially I tries to update the firmware through openwrt, but due to power failure, the same could not be updated. After that i used the TFTP server to update the firmware. It has been updated finally. But now a new problem came.

When i switched on the router one time ALL led blink and after that nothing. My router is without any LED. However, if i connect to the ethernet cable, only one LED will solid on, which will vary based on the changing the port.

Please help me to get out of this.

  0      
  0      
#1
Options
1 Reply
Re:Archer C20 (US) router stuck after firmware update through TFTP
2024-01-23 18:48:24

  @vins231 \

 

Here's the official guide to use when you have bricked toyr router.

You can refer to this video tutorial for firmware recovery as well.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options