Home Network Community > 5G/4G Wi-Fi Routers/MiFi > Stuck, only the logo appeared
< 5G/4G Wi-Fi Routers/MiFi

Stuck, only the logo appeared

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Stuck, only the logo appeared

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Stuck, only the logo appeared
Stuck, only the logo appeared
2024-01-22 17:46:30 - last edited 2024-03-19 07:17:15
Model: M7350  
Hardware Version: V7
Firmware Version:

I bought it in Germany in 2022,it worked great there. Now it is in Serbia. An there worked perfectly for a while, an then when restarting it got stuck on initialization. Only the TP-LINK logo appears. Help me if possible

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Stuck, only the logo appeared-Solution
2024-03-19 07:17:12 - last edited 2024-03-19 07:17:15

Hi All,

 

For such issues, please refer to this thread: Boot Loop or Boot Failure on M7350 V3/V4/V5/V6.2/V7/V8: Stuck on TP-Link Logo

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#9
Options
8 Reply
Re:Stuck, only the logo appeared
2024-01-31 07:31:51

  @mulc 

 

Hi, thanks a lot for the feedback, I've reported the issue to our senior engineer, once there is any available solution, I will let you know.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Stuck, only the logo appeared
2024-02-01 07:49:30

  @Sunce thanks

  0  
  0  
#3
Options
Re:Stuck, only the logo appeared
2024-02-27 09:52:37

  @mulc 

 

Hi, I've sent you a private message, please check if it works

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:Stuck, only the logo appeared
2024-02-29 23:17:49
Salut , j' ai le même problème avec mon modem TP link m7350 v3.20 seul le logo qui apparaît. J'ai vraiment besoin d'aide. Svp s'il y a une solution.
  0  
  0  
#5
Options
Re:Stuck, only the logo appeared
2024-03-01 01:34:02

  @Elma79 
 

Hi, please check your private message.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#6
Options
Re:Stuck, only the logo appeared
2024-03-09 07:47:32

  @Sunshine I see you write that i have private messages. I can't find it

  0  
  0  
#7
Options
Re:Stuck, only the logo appeared
2024-03-11 03:20:40

  @mulc 

 

Hi, I've sent it again today, please check your private message on the top right sider corner like screenshot below:

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#8
Options
Re:Stuck, only the logo appeared-Solution
2024-03-19 07:17:12 - last edited 2024-03-19 07:17:15

Hi All,

 

For such issues, please refer to this thread: Boot Loop or Boot Failure on M7350 V3/V4/V5/V6.2/V7/V8: Stuck on TP-Link Logo

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 593

Replies: 8

Related Articles
 Stuck in boot logo
136 0
 Stuck at TP -Link Logo Restart
1122 0
M 7350 stucked at Logo
654 0
 M7350 V1 Boot Logo
427 0
M7350 V7 stuck in bootloop
446 0
M7350 v4 stuck in bootloop
8304 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.