Wireless Switches Dropping connection and CPU at 100%
I cancelled Sky and went with Three Mobile broadband. The WiFi wasn't good so I have bought an M4 Deco Mesh system and installed it hard wired to the 5G modem.
I have smart lightswitches that connect via 2.4GHz. I've connected all of my devices successfully to the wifi network, but there are certain switches in the house that are constantly dropping connection to the WiFi. I never had this problem with the Sky Router (with 2 satellites miniboxes that acted as repeaters).
Things i've tried to regain stability in these connections:
- Moved the Deco Mesh nodes
- Tried access point mode
- Tried WiFi Router mode
- Removed one of the nodes (I have 4 and I didn't know if it was too much for the house i'm in)
- Reset all Deco units to factory settings
- Rebuilt the network from the ground up repairing all devices
- Set up a guest network that is specifically on 2.4GHz and attached the lightswitches specifically to that so that there are no issues with badwidth etc.
- Wired the router further away from the nodes to avoid any interferance
- Rebooted all lightswitches to ensure that they haven't gotten into a state of disrepair
- Switched around the nodes so that the one that services the part of the house that appears to be working has been moved to the part of the house that doesn't work.
Nothing works. I've been trying different configurations for the last 23 days almost daily and nothing gets these switches working solidly. If i don't have a resolution in the next couple of days i'm going to return them and try a different provider as this isn't ok, but that seems a shame as the connection to the other devices in my house (iPhones, TVs, FireSticks, iPads, Laptops etc) are spot on.
Are Sonoff lightswitches just not compatible with your routers? This doesn't seem to be the case as I have a load in a certain part of my house that are rock solidly connected and never have an issue.
Is it a problem with that part of my house? This worked with the Sky routers ... why would it not work with yours?
Any suggestions welcome ... please?!!!