Hi

I have 3 AX-10 routers, all updated to the latest firmware so that they all show "EasyMesh" in menu and not OneMesh.

I've been trying to create a MESH with LAN backhaul between these 3 routers with limited success.

I also have an AX53 router, updated and set to router mode - but I will get to that later...

I can get one of the 2 AX-10's to connect to the "master" router with the LAN icon showing, but the other unit always shows WiFi - even though it is connected via LAN cable.

I tried multiple configurations:

Master AX-10 -> AX-10 (AP)
                       -> AX-10(AP)

Master AX-10->AX-10(AP)->AX-10(AP)

Master AX-10 -> Switch -> AX-10(AP)

                                       -> AX-10(AP)

But I can only get both the satellite routers to show up in the Main router's Mesh devices list if they are both directly connected to the Master router's LAN ports (not via a switch, or daisy chained via another router).

But still, even when I can have them both show in the Master router Mesh list, only one shows that is is using the LAN backhaul.

I tried the same setup with one of the AP routers being an AX-53, but the same story - when I tried using the AX-53 as the main router, I couldn't get WiFi configured/usable at all - looks like the AX-53 has other WiFi security that is not supported by the AX-10's by default?

What could be the issue?