Problem adding AX20 to AX72 (Main) using EasyMesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Problem adding AX20 to AX72 (Main) using EasyMesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Problem adding AX20 to AX72 (Main) using EasyMesh
Problem adding AX20 to AX72 (Main) using EasyMesh
2024-01-01 04:40:18 - last edited 2024-01-31 07:42:02
Model: Archer AX20  
Hardware Version: V2
Firmware Version:

Happy Blessed New Year to All!

 

I would like to consult how to setup AX20 as satelitte router using TP-link AX72 as main router and EasyMesh channel as I have done the following and it is still cannot be detected by Tether app:

1) Reset to factory setting

2) Removed LAN cable

3) Place it next to main router

4) AX20 OneMesh firmware is updated

 

Appreciate and thanks your solution sharing im advance!

  0      
  0      
#1
Options
1 Accepted Solution
Re:Problem adding AX20 to AX72 (Main) using EasyMesh-Solution
2024-01-01 13:48:24 - last edited 2024-01-31 07:42:02

  @FluoA 

 

Hi,

 

Happy New Year!

 

According to TP-Link's list of EasyMesh-compatible devices (https://www.tp-link.com/en/easymesh/product-list/#wi-fi-routers) the Archer AX20 only supports EasyMesh starting with hardware version V3, while you mentioned you have a V2.

 

Therefore, there is unfortunately no way to make work what you are trying to achieve.

 

According to posts of other users it is possible to connect a EasyMesh router to a OneMesh main router (i.e. use the AX20 as Main router and the AX73 as Satellite), but that doesn't look like a good option in your case, because the Wi-Fi specs of the AX20 are so much inferior to those of the AX73.

 

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Problem adding AX20 to AX72 (Main) using EasyMesh-Solution
2024-01-01 13:48:24 - last edited 2024-01-31 07:42:02

  @FluoA 

 

Hi,

 

Happy New Year!

 

According to TP-Link's list of EasyMesh-compatible devices (https://www.tp-link.com/en/easymesh/product-list/#wi-fi-routers) the Archer AX20 only supports EasyMesh starting with hardware version V3, while you mentioned you have a V2.

 

Therefore, there is unfortunately no way to make work what you are trying to achieve.

 

According to posts of other users it is possible to connect a EasyMesh router to a OneMesh main router (i.e. use the AX20 as Main router and the AX73 as Satellite), but that doesn't look like a good option in your case, because the Wi-Fi specs of the AX20 are so much inferior to those of the AX73.

 

Recommended Solution
  0  
  0  
#2
Options
Re:Problem adding AX20 to AX72 (Main) using EasyMesh
2024-01-01 14:09:43

  @woozle 

 

Hi,

 

Thanks for replying and insight on only AX20 V3 is compatible with EasyMesh meshing.

 

Definitely, will not take the OneMesh option as AX72 is a better choice as Main router.

 

Appreciate and have a nice day!

  0  
  0  
#3
Options