Jio Postpaid Sim stopped working in Archer MR600- kinldy help

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Jio Postpaid Sim stopped working in Archer MR600- kinldy help

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Jio Postpaid Sim stopped working in Archer MR600- kinldy help
Jio Postpaid Sim stopped working in Archer MR600- kinldy help
2023-12-27 14:02:26
Model: Archer MR600  
Hardware Version: V3
Firmware Version: MR600v3_1.1.0_0.9.1

Hello ..

 

My Archer MR 600 stopped working from past few days with JIO Postpaid sim. i have contacted TP link support about the same- TP Link support told me that TP link wont work with Postpaid sim going forward.  i have upgraded to Beta version and router works for Jio Prepaid sim but not working for Postpaid SIM.

 

Is there any solution to this ? is TP link working to fix this issue ? Kinldy help.

 

 

  0      
  0      
#1
Options
4 Reply
Re:Jio Postpaid Sim stopped working in Archer MR600- kinldy help
2023-12-28 06:49:20

  @KarthikBG 

 

Hi, is your Jio SIM 5G SIM or 4G SIM?

Are you using beta firmware provided in this thread: India Jio SIM stops working on TP-Link LTE Gateway Routers after upgrading to 5G?

 

If it still doesn't work, please share with us screenshots of Advanced->Status page, Advanced->Network->Internet page along with system log file.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Jio Postpaid Sim stopped working in Archer MR600- kinldy help
2023-12-28 08:19:42

 

  @Sunshine thanks for your response,

 

1) I have upgraded to Beta version but still i coudn't fine XLAT option in PDP setting .

2) I am using Jio Postpaid SIM. The MCC for Jio is 405, and the MNC is 850

 

my current firmware version

 

below is the screenshots and system log file

 

 

 

System logs

 

2018-10-01 05:30:34 [5] 4G: init LTE module, set flowstat [enableDataLimit 0, enablePaymentDay 0, paymentDay 1, limitation 0, warningPercent 90]
2018-10-01 05:30:34 [5] 4G: LTE Module: profile num [3], default profile [1], active profile [2]
2018-10-01 05:30:34 [5] 4G: DM: profile num [3], default profile [1], active profile [2]
2018-10-01 05:30:35 [5] System: Enable IPv4 SPI Firewall
2018-10-01 05:30:35 [5] System: Enable IPv6 SPI Firewall
2018-10-01 05:30:42 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:30:42 [6] 4G: USER: The service is not available.

2018-10-01 05:30:42 [6] 4G: USER: Network type is NONE.

2018-10-01 05:30:49 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:30:49 [6] 4G: USER: The service status is limited.

2018-10-01 05:30:49 [6] 4G: USER: Network type is LTE.

2018-10-01 05:30:49 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:30:51 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:31:27 [6] 4G: WARN: Network selecting failed, mostly rejected.

2018-10-01 05:33:21 [6] System: Device(1C:99:57:D7:BB:D5) joins in 5G Wlan
2018-10-01 05:33:22 [6] System: Device(1C:99:57:D7:BB:D5) leaves 5G Wlan
2018-10-01 05:33:22 [6] System: Device(1C:99:57:D7:BB:D5) joins in 5G Wlan
2018-10-01 05:33:25 [5] DHCPD: Recv REQUEST from 1C:99:57:D7:BB:D5
2018-10-01 05:33:25 [5] DHCPD: Send ACK to 192.168.1.100
2018-10-01 05:33:55 [6] System: User(Mac:1C:99:57:D7:BB:D5;IP:192.168.1.100) logs in.
2018-10-01 05:34:59 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:35:03 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:35:07 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:35:08 [6] System: Device(1C:99:57:D7:BB:D5) leaves 5G Wlan
2018-10-01 05:35:30 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:36:39 [6] System: Device(1C:99:57:D7:BB:D5) joins in 5G Wlan
2018-10-01 05:36:39 [5] DHCPD: Recv REQUEST from 1C:99:57:D7:BB:D5
2018-10-01 05:36:39 [5] DHCPD: Send ACK to 192.168.1.100
2018-10-01 05:38:19 [6] 4G: USER: Get user's profile now.

2018-10-01 05:38:19 [6] 4G: USER: GetCurrProf result is:  ipver:0  staticApn:0  authType:2  pkgName:jionet2  profname:jionet2  apn:jionet  usr:home-wifi  psw:8884504007  

2018-10-01 05:38:19 [5] 4G: set LTE static IP connection, needSetDefaultGw:1
2018-10-01 05:38:43 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:38:50 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:38:52 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:38:57 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:39:13 [6] System: Device(1C:99:57:D7:BB:D5) leaves 5G Wlan
2018-10-01 05:41:51 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:41:55 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:42:47 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:42:47 [6] 4G: USER: The service status is area limited.

2018-10-01 05:43:00 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:43:09 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:43:09 [6] 4G: USER: The service status is limited.

2018-10-01 05:43:53 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:45:24 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:45:34 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:45:39 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:45:43 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 05:48:32 [6] System: Device(1C:99:57:D7:BB:D5) joins in 5G Wlan
2018-10-01 05:48:32 [5] DHCPD: Recv REQUEST from 1C:99:57:D7:BB:D5
2018-10-01 05:48:32 [5] DHCPD: Send ACK to 192.168.1.100
2018-10-01 05:48:46 [6] System: User(Mac:1C:99:57:D7:BB:D5;IP:192.168.1.100) logs in.

 

 

 

Kindly help.

Karthik

  0  
  0  
#3
Options
Re:Jio Postpaid Sim stopped working in Archer MR600- kinldy help
2024-01-02 09:34:02

  @Sunshine Hello..

 

Can i get an update on this.? is this solvable ? does any TP link router supports Jio 5G postpaid sim ?

 

 

Thanks,

Karthik

  0  
  0  
#4
Options
Re:Jio Postpaid Sim stopped working in Archer MR600- kinldy help
2024-01-03 01:06:02

  @KarthikBG 

 

Hi, your current firmware still shows Build 220727 which is not the beta firmware, please try the firmware update again and make sure it is updated successfully.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#5
Options