Beta Software [Closed] Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode etc.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Update on Deco 11, 2024:
All the new features and modifications has been implemented in the latest official firmware: Archer AX55(EU)_V1_1.3.3 Build 20240628 or Archer AX55(US)_V1_1.3.2 Build 20240325. We recommend updating your router firmware to the latest version.
This thread will be closed for further commends. If you encounter any new problems, please Start a New Thread to provide feedback.
Jan. 31st 2024 Update:
The trial period for the beta firmware has ended, and we will continue to address the ongoing issues.
Please keep an eye out for the official firmware release. If you encounter any new problems, please Start a New Thread to provide feedback.
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Hello Everyone,
We're thrilled to announce the release of public beta firmware for Archer AX55 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, DoH&DoT, ECO Mode, etc. We encourage you to try out this beta firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
Download Link:
Archer_AX55_V1_1.2.6 Build_20231130
Notes:
1. This is a beta firmware and different from the official 1.2.6 version official firmware, please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
2. This public beta firmware for Archer AX55 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Modifications of 1.2.6 Build 20231130 compared to previous beta firmware
1. Improved client type identification accuracy
2. Added quick setup for third-party VPN including Surfshark and NordVPN in VPN Client feature
Here are the related FAQ:
How to Install Surfshark VPN on TP-Link Wireless Routers
How to Install NordVPN on TP-Link Wireless Routers
3. Added new HomeShield parental control features including Blocked Apps, App Time Limits, Always Allowed Apps etc.
The above two modifications are the same as this thread: Public Beta Release for Archer AX55 V1 to Enhance Its Ability to Recognize Client Devices
4. Added new functions to Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
5. Added EasyMesh Backhaul Steering and AP Bind (Preferred WiFi Uplink AP)
Enabling Backhual Steering allows the satellite devices to flexibly connect to different mesh nodes based on their load status, optimizing your EasyMesh network performance.
Preferred WiFi Uplink AP: by default, it is set to Auto, when there are more than two mesh nodes in the same EasyMesh network and wireless backhaul is used, you could select a preferred AP for the satellite device, the preferred AP can be either the main router or another satellite device.
Improvements and Modifications of previous beta firmware 1.2.6 Build 20231106
New Features and Optimizations of EasyMesh:
1. Added Ethernet Backhaul.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
More New Features
5. Added DoT and DoH features on Advanced->Network->Internet page, which supports customizing DNS Server as well.
6. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
10. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
We invite you to download and install the beta firmware to explore these incredible new features. If you encounter any issues or have any suggestions, please leave your comments. Your input is invaluable to us.
Thank you for your continued support and for being part of our community.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
What is DoH and How to use it on TP-Link Wi-Fi Routers?
Product List of Wi-Fi Routers that Support DoH
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
New problem: In the web GUI of the main router, under EasyMesh, I have one RE700X extender configured. This morning, it was inoperative with only one blue LED on. I attempted to access the extender's web interface but the interface did not fully load in the browser and hung. Unplugging the extender and plugging it back in did not fix the problem. The extender was then reset and paired again with the main router using WPS. Now, some hours later, the main router's topology map shows the extender connected to the satellite router. That's OK as the extender is on the first floor, the satellite AX55 (wired) is on the ground floor, and the main router is on the second floor, meaning the extender is equally distant between them But that's not the problem. The problem is that clicking the reboot icon for the RE700X in the main router's GUI does not reboot the extender. It was necessary to enter the extender's GUI to reboot the device.
I rebooted the extender to see if the topology map would change and it did. The RE700X is now showing as being wirelessly connected to the main router instead of the satellite router. Again I tried to reboot the RE700X in the main router's GUI and again, it did not work. Therefore, it does not matter which router it is connected to, the reboot icon does not work for the RE700X.
On a related issue, there is a grammatical error in the message that is displayed when clicking the reboot icon. It reads "RE700x has been reboot" and should read "RE700x has been rebooted"
RE700X hardware version: 1,0
RE700X firmware version: 1.1.4 Build 20230509 Rel. 78185(6985)
- Copy Link
- Report Inappropriate Content
After testing Easymesh Ethernet Backhaul for 2 months, I am going back to:
Router -> AP
(Sharing same SSID/password)
Here my feedback
PROs of Easymesh Ethernet Backhaul:
- Easy configuration in one place
CONS of Easymesh Ethernet Backhaul:
- Wifi Roaming around the house was the same, I thought Easymesh would have 802.11r to improve this, but Sunshine confirmed that Fast roaming was not implemented
- AX55 consumes more CPU
- Less personalization in Satellite, no way to enable Guest Network for example
I really hope AX55 could enable Fast Roaming in a future, something like OpenWRT's implementation
- Copy Link
- Report Inappropriate Content
Hi, please confirm if you are using 1.2.6 official firmware or 1.2.6 beta firmware, which are different, for EasyMesh ethernet backhaul, please use the 1.2.6 beta firmware provided in this thread.
- Copy Link
- Report Inappropriate Content
effem wrote
pkonrad1996 wrote
@pkonrad1996 I'm in this thread because I thought the beta firmware worked on the ax55 pro. Does it not?
Hi, Archer AX55 Pro cannot use firmware for Archer AX55 since they are two different models. And at this moment, there is no such beta firmware for Archer AX55 Pro.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Sunshine
Hi,
I have an AX80(v1) and an AX55 (v1) router. I can use the EasyMesh via Wireless Backhaul without any problem. (AX80 is the main, AX55 is the satellite router)
I got this link for AX55 beta firmware, what is support the Ethernet Backhaul. (The AX80 firmware knows the EB already) I have installed it, but the Ethernet Backhaul is not work.
I used this instruction for setup.
I tried both scenarios.
In case of 1st scenario, the main router doesn't detect the AX55 via LAN cable.
In case of 2nd scenario I think the connection is not Ethernet Backhaul because the icon of connection is wifi signal instead of LAN connector. (And the signal strength become poor.)
Do you have any idea, what is the problem? Thanks in advance.
- Copy Link
- Report Inappropriate Content
Been running this fireware for a month now on 2 AX55 routers (One configured as main router and the other a satellite via ethernet backhaul) - stable performance so far and I think I've seen improvements in wireless roaming. This is compared to using the two devices with one in AP mode.
However, I have noticed the Guest and IOT networks are not being broadcast by the satellite router - this may have been a limitation in OneMesh networks as seen in the thread below - Hoping anyone can shed some light on this or experienced similar?
https://community.tp-link.com/en/home/forum/topic/210476
Thanks,
T
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Sunshine Would just like to ask. May I have the link for latest public release of the beta version please?
- Copy Link
- Report Inappropriate Content
you can find it on first post inside this topic :) but if you don't know how, take it:
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 66959
Replies: 300
Voters 6
