Beta Software [Closed] Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode etc.
Jan. 31st 2024 Update:
The trial period for the beta firmware has ended, and we will continue to address the ongoing issues.
Please keep an eye out for the official firmware release. If you encounter any new problems, please Start a New Thread to provide feedback.
Hello Everyone,
We're thrilled to announce the release of public beta firmware for Archer AX55 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, DoH&DoT, ECO Mode, etc. We encourage you to try out this beta firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
Download Link:
Archer_AX55_V1_1.2.6 Build_20231130
Notes:
1. This is a beta firmware and different from the official 1.2.6 version official firmware, please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
2. This public beta firmware for Archer AX55 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Modifications of 1.2.6 Build 20231130 compared to previous beta firmware
1. Improved client type identification accuracy
2. Added quick setup for third-party VPN including Surfshark and NordVPN in VPN Client feature
Here are the related FAQ:
How to Install Surfshark VPN on TP-Link Wireless Routers
How to Install NordVPN on TP-Link Wireless Routers
3. Added new HomeShield parental control features including Blocked Apps, App Time Limits, Always Allowed Apps etc.
The above two modifications are the same as this thread: Public Beta Release for Archer AX55 V1 to Enhance Its Ability to Recognize Client Devices
4. Added new functions to Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
5. Added EasyMesh Backhaul Steering and AP Bind (Preferred WiFi Uplink AP)
Enabling Backhual Steering allows the satellite devices to flexibly connect to different mesh nodes based on their load status, optimizing your EasyMesh network performance.
Preferred WiFi Uplink AP: by default, it is set to Auto, when there are more than two mesh nodes in the same EasyMesh network and wireless backhaul is used, you could select a preferred AP for the satellite device, the preferred AP can be either the main router or another satellite device.
Improvements and Modifications of previous beta firmware 1.2.6 Build 20231106
New Features and Optimizations of EasyMesh:
1. Added Ethernet Backhaul.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
More New Features
5. Added DoT and DoH features on Advanced->Network->Internet page, which supports customizing DNS Server as well.
6. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
10. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
We invite you to download and install the beta firmware to explore these incredible new features. If you encounter any issues or have any suggestions, please leave your comments. Your input is invaluable to us.
Thank you for your continued support and for being part of our community.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
What is DoH and How to use it on TP-Link Wi-Fi Routers?
Product List of Wi-Fi Routers that Support DoH
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Sunshine wrote
Hi, satellite router doesnt have guest network at this moment, we have reported it to the development team to evaluate it, please wait for any new firmware update.
@Sunshine
+1
I just setup an EasyMesh network (with this beta firmware) using a AX55 as the main and an AX10 as a satellite. Firmware updates, EasyMesh setup, and Ethernet backhaul testing all went smoothly, but this is the biggest feature I'm missing as my satellite router is in the part of my house where I most need the guest network.
- Copy Link
- Report Inappropriate Content
Hi all!
I updated AX55 to the latest update (Archer_AX55_V1_1.2.6 Build_20231130). After that, A64 doesn't recognize AX55 as main router. Now I can't even use easymesh, let alone erthernet backhaul. I have tried resetting the device, but no luck.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hey, will help restart router to default settings OR push reset button on device :) But before do backup just in case if you don't want setting up all from beginning :)
- Copy Link
- Report Inappropriate Content
Hello,
Is there a beta firmware for AX55 Pro? If not, will it be? My father needs Ethernet backhaul due to the thick walls that effectively suppress WiFi between the AX10 and AX55Pro. Sorry for the poor language - I use Google translator.
Regards :)
- Copy Link
- Report Inappropriate Content
With the AX55 operating as an EasyMesh satellite router, the following firmware bugs are noted when using firmware 1.2.6 Build 20231130 rel. 74059:
1. The user is unable to access the web interface with HTTPS, receiving the message “Local Management via HTTPS is disabled. Please access the device via HTTP.” Under System, Administration, there is no option to enable this as in the main router.
2. Under System, USB Storage Device, Access Method, the user is unable to disable either option, receiving the message “Operation failed”.
3. Under System, USB Storage Device, Access Method, the user is unable to edit and save the server name, receiving the message “Operation failed”.
4. Even with Device Isolation enabled in the main router, any device connected to the satellite router can still communicate with any other device connected to the satellite router, isolated or not.
5. The user is unable to set a static IP address in the satellite router.
No other issues, such as dropping connections, reboots, etc., have been noted thus far. Some of the new features (such as the DNS options, Eco Mode, etc) were not tested.
- Copy Link
- Report Inappropriate Content
there is some backup issue after upgrade to new beta firmware. To set up static ip for satelitte router, you need first remove and add it again on DHCP on main router, and after restart and should work.
- Copy Link
- Report Inappropriate Content
Hello again. i find out some bug:
I cant setup WIFI settings. But i don't have any Wireless Schedule settings active LOL
And i have to click skip anyway to be able change something :D
- Copy Link
- Report Inappropriate Content
There is a difference between a static IP and a reserved IP. Only a reserved IP works in the satellite router and it must be within the range of the main router's DHCP server. I need to assign a static IP that is outside of the DHCP range.
- Copy Link
- Report Inappropriate Content
pkonrad1996 wrote
@pkonrad1996 I'm in this thread because I thought the beta firmware worked on the ax55 pro. Does it not?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 65020
Replies: 303
Voters 6
