Beta Software [Closed] Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode etc.
Jan. 31st 2024 Update:
The trial period for the beta firmware has ended, and we will continue to address the ongoing issues.
Please keep an eye out for the official firmware release. If you encounter any new problems, please Start a New Thread to provide feedback.
Hello Everyone,
We're thrilled to announce the release of public beta firmware for Archer AX55 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, DoH&DoT, ECO Mode, etc. We encourage you to try out this beta firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
Download Link:
Archer_AX55_V1_1.2.6 Build_20231130
Notes:
1. This is a beta firmware and different from the official 1.2.6 version official firmware, please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
2. This public beta firmware for Archer AX55 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Modifications of 1.2.6 Build 20231130 compared to previous beta firmware
1. Improved client type identification accuracy
2. Added quick setup for third-party VPN including Surfshark and NordVPN in VPN Client feature
Here are the related FAQ:
How to Install Surfshark VPN on TP-Link Wireless Routers
How to Install NordVPN on TP-Link Wireless Routers
3. Added new HomeShield parental control features including Blocked Apps, App Time Limits, Always Allowed Apps etc.
The above two modifications are the same as this thread: Public Beta Release for Archer AX55 V1 to Enhance Its Ability to Recognize Client Devices
4. Added new functions to Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
5. Added EasyMesh Backhaul Steering and AP Bind (Preferred WiFi Uplink AP)
Enabling Backhual Steering allows the satellite devices to flexibly connect to different mesh nodes based on their load status, optimizing your EasyMesh network performance.
Preferred WiFi Uplink AP: by default, it is set to Auto, when there are more than two mesh nodes in the same EasyMesh network and wireless backhaul is used, you could select a preferred AP for the satellite device, the preferred AP can be either the main router or another satellite device.
Improvements and Modifications of previous beta firmware 1.2.6 Build 20231106
New Features and Optimizations of EasyMesh:
1. Added Ethernet Backhaul.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
More New Features
5. Added DoT and DoH features on Advanced->Network->Internet page, which supports customizing DNS Server as well.
6. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
10. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
We invite you to download and install the beta firmware to explore these incredible new features. If you encounter any issues or have any suggestions, please leave your comments. Your input is invaluable to us.
Thank you for your continued support and for being part of our community.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
What is DoH and How to use it on TP-Link Wi-Fi Routers?
Product List of Wi-Fi Routers that Support DoH
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Your support team contacted me and the issue has been resolved. In case it may help others, below is a copy of part of my response to your team.
Response:
The problem was traced to the IP & MAC Binding List in the main router. Unknowingly, the AX55 does not use separate MAC addresses for the WAN and LAN ports when operating in the access point mode. As the AX55 under test was initially bound in the main router while operating in the wireless router mode, that binding was no longer valid when the mode of the test router was changed to access point and the MAC address was then incorrect by 1 digit.
- Copy Link
- Report Inappropriate Content
thank you for sharing this. may I ask how you solved it? did you have to delete the whole IP &MAC binding list or just the one for the satellite router?
- Copy Link
- Report Inappropriate Content
Thanks a lot for the update, glad to hear that you've located the issue. So now the only remaining issue is the client list not updating in wireless router mode with the beta firmware, am I right?
@serengeti I think it is enough to delete the IP&MAC binding for the second AX55 in AP mode for jra11500 case(he is not using mesh network, just a main router and an AP), or modify the MAC address of second AX55 to use LAN MAC.
- Copy Link
- Report Inappropriate Content
Hi, I have been testing the firmware, the network is as follows
Main AX55 <---> Satellite AX55 (1) <--> Satellite AX55 (2)
The network is unstable, the mesh seems to switch to WiFi or disconnect from time to time, it also seems that on Tether App only the first Satellite (1) is shown in the EasyMesh option
Edit:
Removed the first Satellite (1) because the unstability was permanent, now I'm trying Main AX55 <---> Satellite AX55 (2) which seems to be working fine
Edit2:
I have enabled IP & MAC Binding, found duplicate MACs in the ARP List, deleted the duplicates, bound the remaining and it has been working fine for some hours, I'll keep you posted if the network becomes unstable again
- Copy Link
- Report Inappropriate Content
The issue was solved by:
1. Deleting the incorrect IP & MAC binding entry for the satellite router in the main router's binding list
2. Verifying the normal operation of the satellite router without any binding
3. Adding the satellite router again to the main router's binding list using the main router's ARP list
- Copy Link
- Report Inappropriate Content
You are correct. The only issue I have at present is the one dealing with the clients list.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, if you now connect the Satellite (1) to the main router directly, will all the three AX55 work stable?
- Copy Link
- Report Inappropriate Content
Hello! :)
I notice new problem.
While sending a big file to Storage Sharing - Satellite Router
Devices connected to Satellite Router by ethernet cable start be unstable and interent droping to 0 speed.
But wifi seems working fine.
- Copy Link
- Report Inappropriate Content
Hi, I can't try that configuration because how the ethernet wires are set, but I have enabled IP & MAC Binding, found duplicate MACs in the ARP List, deleted the duplicates, bound the remaining and it has been working fine for some hours, I'll keep you posted if the network becomes unstable again
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 64514
Replies: 303
Voters 6
