Beta Software [Closed] Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode etc.
Jan. 31st 2024 Update:
The trial period for the beta firmware has ended, and we will continue to address the ongoing issues.
Please keep an eye out for the official firmware release. If you encounter any new problems, please Start a New Thread to provide feedback.
Hello Everyone,
We're thrilled to announce the release of public beta firmware for Archer AX55 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, DoH&DoT, ECO Mode, etc. We encourage you to try out this beta firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
Download Link:
Archer_AX55_V1_1.2.6 Build_20231130
Notes:
1. This is a beta firmware and different from the official 1.2.6 version official firmware, please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
2. This public beta firmware for Archer AX55 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Modifications of 1.2.6 Build 20231130 compared to previous beta firmware
1. Improved client type identification accuracy
2. Added quick setup for third-party VPN including Surfshark and NordVPN in VPN Client feature
Here are the related FAQ:
How to Install Surfshark VPN on TP-Link Wireless Routers
How to Install NordVPN on TP-Link Wireless Routers
3. Added new HomeShield parental control features including Blocked Apps, App Time Limits, Always Allowed Apps etc.
The above two modifications are the same as this thread: Public Beta Release for Archer AX55 V1 to Enhance Its Ability to Recognize Client Devices
4. Added new functions to Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
5. Added EasyMesh Backhaul Steering and AP Bind (Preferred WiFi Uplink AP)
Enabling Backhual Steering allows the satellite devices to flexibly connect to different mesh nodes based on their load status, optimizing your EasyMesh network performance.
Preferred WiFi Uplink AP: by default, it is set to Auto, when there are more than two mesh nodes in the same EasyMesh network and wireless backhaul is used, you could select a preferred AP for the satellite device, the preferred AP can be either the main router or another satellite device.
Improvements and Modifications of previous beta firmware 1.2.6 Build 20231106
New Features and Optimizations of EasyMesh:
1. Added Ethernet Backhaul.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
More New Features
5. Added DoT and DoH features on Advanced->Network->Internet page, which supports customizing DNS Server as well.
6. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
10. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
We invite you to download and install the beta firmware to explore these incredible new features. If you encounter any issues or have any suggestions, please leave your comments. Your input is invaluable to us.
Thank you for your continued support and for being part of our community.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
What is DoH and How to use it on TP-Link Wi-Fi Routers?
Product List of Wi-Fi Routers that Support DoH
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, we need to debug via remote session when the issue occurs, but since it has not happened since, it is hard to say whether or when it will happen again.
You could let us know if it happens again, and I will also inform you when there is new official firmware released, in that case, you could install new firmware and monitor.
- Copy Link
- Report Inappropriate Content
We have reported the issue to the support engineers, they will likely reach out to you via email to continue to troubleshoot your issue.
Please check your email box and confirm.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
To assist you efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.
- Copy Link
- Report Inappropriate Content
What do I have to do so you can check the logs on my router ???
I will reset both and will create a mesh network. The main router is AX73 v2 with latest firmware and the second is AX55 v1 with the latest beta.
When I put them in Mesh the network goes down in few hours and rebooting AX55 seems to fix the network and then again in few hours the WIFI is down.
- Copy Link
- Report Inappropriate Content
Hi, when the issue happens, if you still could connect any device to the main router either via WiFi or via Ethernet cable, you could log into the main router web interface and save system logs on Advanced->System Tools->System Log page.
Besides, your case has been escalated to our senior engineer for debugging, please wait for the reply from our senior engineer, if you get the logs or any more information, please reply the email as well.
- Copy Link
- Report Inappropriate Content
Is there a chance for a fix so that the wired connection is always priority ?
I am using the following configuration: ax55(latest beta, AP mode, main), ax23(latest official, satellite), ax10(latest officiall, satellite) all in the mesh network. All routers are connected with a cat 6e cable to the supplier's router.
After each power failure (or restart of one of the tp router) for ethernet backhaul to work I need to cover the antennas with a metal pot. Only after the complete loss of the wireless connection does it work properly.
Status after rebot:
Status after temporarily covering the router's antennas:
- Copy Link
- Report Inappropriate Content
Sunshine wrote
To assist you efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.
ok i wating than :) im glad we alll fight for better firmware.
Btw. Im with TP -LINK products from 2019 :)
- Copy Link
- Report Inappropriate Content
Hi, may I know if all the three TP-Link routers are connected directly to your ISP Router? and is there any switch between them?
Normally wired backhaul is indeed priority from wireless backhaul for now, if possible, please try connecting the AX23 and AX10 to LAN ports of AX55 to see if wired backhaul works automatically.
By the way, what is the model no. of your ISP router?
After confirming the above information, I would like to escalate your case to our senior engineer for debugging as well, please let us know the specific hardware and firmware version of your AX23 and AX10.
- Copy Link
- Report Inappropriate Content
Thanks a lot for your trust and support on our product, hope the issue can be located and resolved soon.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 65312
Replies: 303
Voters 6
