Beta Software [Closed] Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode etc.
Jan. 31st 2024 Update:
The trial period for the beta firmware has ended, and we will continue to address the ongoing issues.
Please keep an eye out for the official firmware release. If you encounter any new problems, please Start a New Thread to provide feedback.
Hello Everyone,
We're thrilled to announce the release of public beta firmware for Archer AX55 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, DoH&DoT, ECO Mode, etc. We encourage you to try out this beta firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
Download Link:
Archer_AX55_V1_1.2.6 Build_20231130
Notes:
1. This is a beta firmware and different from the official 1.2.6 version official firmware, please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
2. This public beta firmware for Archer AX55 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Modifications of 1.2.6 Build 20231130 compared to previous beta firmware
1. Improved client type identification accuracy
2. Added quick setup for third-party VPN including Surfshark and NordVPN in VPN Client feature
Here are the related FAQ:
How to Install Surfshark VPN on TP-Link Wireless Routers
How to Install NordVPN on TP-Link Wireless Routers
3. Added new HomeShield parental control features including Blocked Apps, App Time Limits, Always Allowed Apps etc.
The above two modifications are the same as this thread: Public Beta Release for Archer AX55 V1 to Enhance Its Ability to Recognize Client Devices
4. Added new functions to Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
5. Added EasyMesh Backhaul Steering and AP Bind (Preferred WiFi Uplink AP)
Enabling Backhual Steering allows the satellite devices to flexibly connect to different mesh nodes based on their load status, optimizing your EasyMesh network performance.
Preferred WiFi Uplink AP: by default, it is set to Auto, when there are more than two mesh nodes in the same EasyMesh network and wireless backhaul is used, you could select a preferred AP for the satellite device, the preferred AP can be either the main router or another satellite device.
Improvements and Modifications of previous beta firmware 1.2.6 Build 20231106
New Features and Optimizations of EasyMesh:
1. Added Ethernet Backhaul.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
More New Features
5. Added DoT and DoH features on Advanced->Network->Internet page, which supports customizing DNS Server as well.
6. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
10. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
We invite you to download and install the beta firmware to explore these incredible new features. If you encounter any issues or have any suggestions, please leave your comments. Your input is invaluable to us.
Thank you for your continued support and for being part of our community.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
What is DoH and How to use it on TP-Link Wi-Fi Routers?
Product List of Wi-Fi Routers that Support DoH
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Sunshine I went to bed, woke up and it's happened again, web interface is down again, where logging in just throws the same "Operation Failed" and redirects me back to http://tplinkwifi.net/ .
Edit:
Additional note, i've intentionally not restarted the router since the web interface is down, and i'm happy to say internet has still been up and stable, so at least it's not the same issue as the previous firmware update issue.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Sunshine no. i could not log in. I tried also to reset, but still same problem. I am using now the router mode, but I would need ap mode instead.
- Copy Link
- Report Inappropriate Content
My configuration is AX55 (this beta firmware, AP mode, mesh main) + AX23 (lates firmware, mesh satellite), both connected via RJ45 to the provider's router. Problems:
1) When mesh works, cant login (via cable/wifi directly to main ax55) - "Operation Failed" after submit password.
After turning off ax23 and restarting ax55, it works until ax23 switch on.
2) Tether app doesn't show any connected clients when running in mesh config.
- Copy Link
- Report Inappropriate Content
Atsukio wrote
@Sunshine I went to bed, woke up and it's happened again, web interface is down again, where logging in just throws the same "Operation Failed" and redirects me back to http://tplinkwifi.net/ .
Edit:
Additional note, i've intentionally not restarted the router since the web interface is down, and i'm happy to say internet has still been up and stable, so at least it's not the same issue as the previous firmware update issue.
Hi, you have only AX73(US) V1 and this Archer AX55 V1 in AP mode, no other extender etc., thus no EasyMesh network created, right?
May I have if you configured any features on the AX55 AP mode? if possible, please backup a configuration file of your Archer AX55 V1 and share it with us, we would like to use the same configuration to test on our end to see if the issue can be reproduced. In order to access the configuration, please send me a private message to provide your login password as well. Thanks in advance.
- Copy Link
- Report Inappropriate Content
Hi, do you mean the issue also happens suddenly, error "Operation Failed" appears when login and redirects you to http://tplinkwifi.net/ as well?
Please let me know if you configured any features on the AX55 AP mode, your network topology and whether you have EasyMesh network established.
- Copy Link
- Report Inappropriate Content
Hi, what is your network topology? and what are you other EasyMesh satellite devices?
When we test it in AP mode, we encountered the login issue when swithing to AP mode as well, but the issue was fixed after restarting the main AX55 and no issue anymore after that, so we would like to know more details to see the issue can be reproduced on our end again.
- Copy Link
- Report Inappropriate Content
Hi, Do you mean Archer AX55 and AX23 are both connected to your ISP router, and at the same time, AX23 is connected wirelessly to the AX55 to build EasyMesh network?
If so, it seems that there is a network loop since the three devices are connected to each other, please try disconnecting AX23 from your ISP router, leave the AX23 connected to AX55 wirelessly, then check if everything works fine.
- Copy Link
- Report Inappropriate Content
Sunshine wrote
Atsukio wrote
@Sunshine I went to bed, woke up and it's happened again, web interface is down again, where logging in just throws the same "Operation Failed" and redirects me back to http://tplinkwifi.net/ .
Edit:
Additional note, i've intentionally not restarted the router since the web interface is down, and i'm happy to say internet has still been up and stable, so at least it's not the same issue as the previous firmware update issue.
Hi, you have only AX73(US) V1 and this Archer AX55 V1 in AP mode, no other extender etc., thus no EasyMesh network created, right?
May I have if you configured any features on the AX55 AP mode? if possible, please backup a configuration file of your Archer AX55 V1 and share it with us, we would like to use the same configuration to test on our end to see if the issue can be reproduced. In order to access the configuration, please send me a private message to provide your login password as well. Thanks in advance.
I can't seem to upload the file here, so i've sent you a link to it via google drive with the password.
Also yep to confirm that it's just the AX73(US) V1 and this Archer AX55 V1 in AP mode, no other extender etc, EasyMesh's setting is enabled but there is no network. There is also no specific feature i've touched as far as i'm aware, i just turned off the DHCP server to let the AX73 handle it and WiFi channel settings, that's pretty much it.
Edit: Forgot to mention it's AP connected via Ethernet and not WiFi.
- Copy Link
- Report Inappropriate Content
Thanks a lot for those information, I've received the backup file and reported to our senior engineer, once there is any update, I will let you know.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 64982
Replies: 303
Voters 6
