Port Forwarding Camera Problem
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I'm having a problem with port forwarding some of my cameras for remote viewing on MobiLincCam app. I have a Reolink NVR with 8 Reolink cameras connected (7 connected POE and 8 via WiFi). I have successfully set up the WiFi camera to be viewed in the MobiLinc app. However, the 7 that are connected via POE cannot connect. I am fairly certain I know the reason but cannot figure out a fix. The default gateway for the NVR is 192.168.68.1 and the IP address is 192.168.68.44. However, the 7 POE cameras all have IP addresses in the 172.16.25.xx range. The WiFi camera that does work in the MobiLinc app has an IP address of 192.168.68.47 (same gateway as the NVR). The POE cameras were all added automatically to the NVR as soon as I connected them and I cannot change their IP addresses to addresses in the 192.168.68.1 gateway. Is there something I can do i port forwarding to make this work. I hope this issue is clear and that it is understandable. Thank you.
