Config Mode Router - IP Configuration ISP modem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Config Mode Router - IP Configuration ISP modem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Config Mode Router - IP Configuration ISP modem
Config Mode Router - IP Configuration ISP modem
2023-06-13 09:25:08
Model: Deco M9 Plus   Deco M5  
Hardware Version: V1
Firmware Version: Deco M9 firm 1.6.1- Deco M5 1.7.1

Havr Deco M5 Deco M9 Plus and operate in acesss point mode , i trying to change to router mode , no sucess , firstly change the ISP modem to bridge and after in Deco app change acess point to router mode . After this can have internet on deco's , what ip have to use ? Same range of isp router as diference ip a sequency number like 192.168.01 and 192.168.0.2 or totally diference range ? Or force a  IP on the ISP router ? 
tried several ways and days without sucess

 

  0      
  0      
#1
Options
1 Reply
Re:Config Mode Router - IP Configuration ISP modem
2023-06-13 13:29:22

Undo all changes to get back to working configuration: ISP modem in router mode and Deco mesh in AP mode.

 

Then, proceed with the following order:

 

1. Configure Deco mesh to run in Router mode. Verify you have Internet and Deco mesh is healthy (online).

 

2. Change ISP modem to bridge. Power off and on Main Deco.

 

There is a big chance everything will just work if done in that order.

 

If not, if after that you do not have Internet connection - contact your ISP tech support with the question of how to configure third party router (Main Deco in your case) to work with their modem which is in bridge mode.

  0  
  0  
#2
Options