Deco has temporarily switched your Wi-FI channel width to 80 MHz due to detected radar signals.
Few times in a week I have been experiencing this problem on my XE75 Pro , See below screen shot.
The XE75 pro has the 160 MHz feature which allows high bandwith speeds but downgrades when it detects radar signals. When the deco switches back to 80 MHz its pretty much disconnects all 2.4 Ghz devices, Sky Q , Ring Doorbell and chimes and most of the smart lights etc. They may come back but can be 15-20 minutes later.
On some occasions the Loft Satelite node which generally has strong wireless backhaul and very good speeds goes offline does not reconnect to the Main deco and needs to be power cycled. ( yellow or red light ) .
The XE75 will not go back to the 160 MHz wifi setting unless you manually do so in the app even though the message says " Temporarily" . I believe this DFS strike is false or not accurate as i am not near any airports or a weather station/ radar based in the UK England .
If i cannot use the 160htz my bandwith speeds are generally much slower.
Why do my 2.4 Ghz devices seem to disconnect and struggle to reconnect when this happens and does the system eventually go back to 160 Mhz or does it not work.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@David-TP i need to disable this feature as it shuts off my internet for several minutes at critical times such as video conference calls, etc. this is a feature that should not cause complete network disruption, or should be able to be DISABLED. Please explain how to disable this auto-switching.
No other router I have ever used has ever just dropped all connections at a critical period so it can "switch bandwidths". this should require at the VERY LEAST user acknowledgement AND permission, and a reboot.
Please reply ASAP.
- Copy Link
- Report Inappropriate Content
Hi, Thank you for the feedback.
When the "Auto switch" is disabled, the 5GHz will remain on 80MHz. It is against the local wireless regulation if the router doesn't avoid co-channel operation with systems that predate Wi-Fi, such as military radar, satellite communication, and weather radar.
However, if you think it is more like a false alarm on Deco APP, please try to save a copy of the system log from the web UI and contact the local technical support.
Thanks again and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP These are 100% false alarms. There are no military, satellite or weather radar equipment near me. There have been other people reporting the same issue and they live in rural areas where there are literally no buildings around for miles. There are enough reports like this that Tplink should be doing a thorough investigation on their own to fix it. When people replace the equipment with a other vendor, they don't have the same issue either. 100% and issue with this gear only.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Bluefalconer I replaced my old Nighthawk r8000 with the 2 pack Deco xe75.
The only con has been the dfs switching due to radar detection. It is very annoying when you work from home.
ive left it at 80 cause there is no issues besides the speeds slowdown quite a bit.
Sadly i live in the city next to a hospital, there is a military base 3.5 miles away or so im basically screwed.
there is no way to assign channels your self which would help avoid this issue . I feel like with the amount of people having the issue that a firmware update needs to address this stupid issue. I should not have to return this product to buy someone elses to avoid this problem.
tplink you really need to research this issue , look at this thread alone with all the issues. You dont want customers to return your product for a competitors.
add a way to so we can change the wifi channels to avoid the dfs issues with radar detection.
- Copy Link
- Report Inappropriate Content
I started having this issue. And resets didn't work. What end up working for me is switching the port receiving the Ethernet. Looks like my port 1 is broken(works occasionally) which caused this specific issue.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 12
Views: 37957
Replies: 76
Voters 3
