unable to create OneMesh with MR600 v1 and WPA8631P v3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

unable to create OneMesh with MR600 v1 and WPA8631P v3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
unable to create OneMesh with MR600 v1 and WPA8631P v3
unable to create OneMesh with MR600 v1 and WPA8631P v3
2023-04-05 20:02:05 - last edited 2023-04-10 01:58:11
Model: Archer MR600  
Hardware Version: V1
Firmware Version: 1.2.0 0.9.1

Hi

I recently purchased a WPA8631P kit. 
I have been troubleshooting it for some time now, with multiple bumps on the way. 
I have now updated the firmware on both Powerlines to the most recent.

 

the upgrade havn't seemed to change status on the WPA8631p onemesh interface. The first time, dit it gave me the option to try to connect. It took some time and then it concluded that my router was not on compatible. Then i updated the firmware, but now i could not try to connect again, i then reset the powerline device, but nothing has changed. i can't try to connect it again.

I have then checked for firmware upgrade for my router, but there is none. There is one in the v2, that fixes some onemesh isues. The mr600 v1 is listed as supporting onemesh, but i can't get it to work.

 

is there any firmware beta or other fix for this issue?

  0      
  0      
#1
Options
1 Accepted Solution
Re:unable to create OneMesh with MR600 v1 and WPA8631P v3-Solution
2023-04-06 12:54:11 - last edited 2023-04-10 01:58:11
Thanks for the suggestion. For some reason it works today. I disabled the power saving mode on the PLCs and they started working as intended again, and for some reason, i could now retry to join mesh with the wpa8631p, and it succeeded. I will turn back if issues occur
Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:unable to create OneMesh with MR600 v1 and WPA8631P v3
2023-04-06 06:45:29

  @AnthonFT 

 

Hi, please try the beta firmware of MR600 V1 mentioned here: https://community.tp-link.com/en/home/forum/topic/579834

 

And let us know if it solves the OneMesh problem.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:unable to create OneMesh with MR600 v1 and WPA8631P v3-Solution
2023-04-06 12:54:11 - last edited 2023-04-10 01:58:11
Thanks for the suggestion. For some reason it works today. I disabled the power saving mode on the PLCs and they started working as intended again, and for some reason, i could now retry to join mesh with the wpa8631p, and it succeeded. I will turn back if issues occur
Recommended Solution
  0  
  0  
#3
Options