I recently purchased a three Deco package to sort out the poor wifi from my router (Plusnet). One Deco is wired to the router (wifi is disabled on the router), with two other Decos connecting to it via wifi as expected. My printer is connected via wifi and works just fine from wifi connected computers.

I also have a switch connected to the router for some wired devices, including a desktop computer. When I try to print, the wired devices can't find the printer. A little bit of digging and I found that the DHCP on the router is assigning IP addresses 192.168.1.64 to 192.168.1.199 with subnet mask 255.255.0.0 and the Deco network is assigning addresses 172.16.0.*  netmask 255.255.252.0.

I cannot find anywhere in the Deco app or the web page for the Deco system to set this DHCP range or to change any of the configuration. I can't even see what range is being assigned so I can manually set my router DHCP to avoid the Deco range. How do I get wired devices to see the wifi printer?

Cheers