Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Deco X90 with 100mpbs limited wifi speed on restart

< Deco

Deco X90 with 100mpbs limited wifi speed on restart

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco X90 with 100mpbs limited wifi speed on restart

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

lemott

2023-02-04 23:32:29 - last edited 2023-02-12 19:40:24

Posts: 3

Helpful: 4

Solutions: 0

Stories: 0

Registered: 2023-02-04

Deco X90 with 100mpbs limited wifi speed on restart

2023-02-04 23:32:29 - last edited 2023-02-12 19:40:24

Tags: #Firmware Update

Model: Deco X90

Hardware Version: V1

Firmware Version: firmware 1.1.4 Build 20221114 Rel. 50649

My deco x90 is working normally but internet speed via wifi is capped at 100mbps whenever ISP modem or deco is turned off and on again.

When the speed is limited to 100mbps, I need to disconnect the deco network cable from the 2.5Gbps port, and connect it to the 1Gbps port, with the ISP's modem turned on, then the speed returns to normal.

When the deco or the ISP modem are turned off and on again, the speed is again limited to 100 mbps, needing to change the port from 1Gbps to 2.5Gbps, with the ISP modem and the deco turned on.

Whenever the deco or modem is rebooted or restarted I need to repeat this process.

There is some bug in the deco x90 software.

4 Reply

David-TP

2023-02-07 09:50:24 - last edited 2023-02-12 19:40:24

Posts: 12347

Helpful: 1709

Solutions: 1118

Stories: 9

Registered: 2020-04-14

Re:Deco X90 with 100mpbs limited wifi speed on restart

2023-02-07 09:50:24 - last edited 2023-02-12 19:40:24

@lemott

Hi, Thank you very much for your feedback.

I would like to forward your case to the senior engineers later and could you please help with some details first:

1. Have you tried to change a different Deco as the main Deco to see whether the issue continued---https://www.tp-link.com/en/support/faq/2400/?

2. If possible Please also change to a new Ethernet cable to test this issue as well.

3. Have you checked whether the Ethernet connection speed from Deco X90 was capped at 100m/s as well?

Wait for your reply.

best regards.

Check What's Currently Going on With Deco Deco Early Access Firmware Open for Test! Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.

lemott

LV1

2023-02-12 19:38:29

Posts: 3

Helpful: 4

Solutions: 0

Stories: 0

Registered: 2023-02-04

Re:Deco X90 with 100mpbs limited wifi speed on restart

2023-02-12 19:38:29

@David-TP

Hello David-TP

1 - I performed the main deco switch, and the deco crashed twice. On the third attempt, the new main deco started to provide internet at full speed. After restarting, the limited speed problem occurred again, but now the speed is limited to 200mbps and the upload to 75 mbps. When changing the ethernet port cable the problem was not solved anymore. My connection stays capped at 200 mbps download and 75 mbps upload.

2 - I tested with 3 different network cables. but the issue persists.

3 - yes, it was too. Now its capped at 200mbps.

lemott

LV1

2023-02-12 20:11:38

Posts: 3

Helpful: 4

Solutions: 0

Stories: 0

Registered: 2023-02-04

Re:Deco X90 with 100mpbs limited wifi speed on restart

2023-02-12 20:11:38

after 30 minutes the speed was not capped anymore. Now its working at full speed.

David-TP

2023-02-13 03:04:45

Posts: 12347

Helpful: 1709

Solutions: 1118

Stories: 9

Registered: 2020-04-14

Re:Deco X90 with 100mpbs limited wifi speed on restart

2023-02-13 03:04:45

@lemott

Thank you very much for the update.

Please monitor the performance of Deco X90 for a while and check whether the same issue is repeated again.

If yes, please feel free to update here.

Best regards.

Deco X90 with 100mpbs limited wifi speed on restart

Deco X90 with 100mpbs limited wifi speed on restart

Information

Voters 1

Tags