New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
This Article Applies to:
If you're interested in the EasyMesh Wired/Ethernet Backhaul feature and would like to know which models support it before purchasing, It's suggested checking the EasyMesh Product List page for accuracy. You can use the "Wireless and Wired Combined Backhaul" filter on that page or click this link directly to find the models that support it quickly.
For your convenience, we have included a list of the models that support EasyMesh Wired/Ethernet Backhaul.
Model & Hardware |
Original Supported Firmware Version |
Update Date |
|---|---|---|
Wi-Fi 7 Routers (BE Series) |
||
| Archer GE800_V1/1.6 | 1.0.4 Build 20240128 | / |
| Archer GE650 | Official Firmware | Oct 15, 2024 |
| Archer GE550 | Official Firmware | Oct 15, 2024 |
| Archer BE900_V1&V2 | Latest Official Firmware | / |
| Archer BE805_V1 | Latest Official Firmware | / |
| Archer BE800_V1 | 1.1.1 Build 20240227 | / |
| Archer BE700 | Latest Official Firmware | / |
| Archer BE700 Pro | Latest Official Firmware | / |
| Archer BE11000 Pro | Latest Official Firmware | / |
| Archer BE550_V1 | Latest Official Firmware | / |
| Archer BE9300_V1 | Latest Official Firmware | / |
| Archer BE230 | Latest Official Firmware | / |
| Archer BE3600 | Latest Official Firmware | / |
Wi-Fi 6E/6 Routers (AX Series) |
||
| Archer GXE75_V1 | Official Firmware | Oct 15, 2024 |
| Archer AXE75_V1 | 1.2.0 Build 20240320 | / |
| Archer AX58_V2 | Official Firmware | / |
| Archer AX53_V1 | 1.2.4 Build 20240206 (Public Beta Firmware for Trial) | / |
| Archer AX53_V2 | Official Firmware | / |
| Archer AX55 Pro_V2/2.6 | Official Firmware | / |
| Archer AX55 Pro_V1 | Official Firmware | Jul 25, 2024 |
| Archer AX55_V2 | 1.2.1 Build 20240909 (Pre-release Firmware) | Oct 18, 2024 |
| Archer AX55_V1/V4 | Official Firmware | Oct 23, 2024 |
| Archer AX80_V1 | 1.1.0 Build 20230915 | / |
| Archer AX72 Pro_V1 | 1.2.2 Build 20230831 | / |
| Archer AX5400 Pro_V1.6 | 1.2.2 Build 20230831 | / |
| Archer AX73_V1 | 1.3.5 Build 20230919 | / |
| Archer AX73_V2 | 1.0.11 Build 20230829 | / |
| Archer AX23_V1/V1.2 | 1.1.0 Build 20230725 | / |
| Archer AX1800_V1.2 | 1.1.0 Build 20230725 | / |
| Archer AX10_V1/V1.2/V2 | 1.3.8 Build 20230619 | / |
| Archer AX1500_V1/V1.2/V2 | 1.3.8 Build 20230619 | / |
| Archer AX72_V1 | 1.2.1 Build 20230626 | / |
| Archer AX4800_V1 | Latest Official Firmware | / |
| Archer AX4400(US)_V2.6 | 1.2.1 Build 20230626 | / |
| Archer AX20_V3 | 1.2.0 Build 240809 | Sep 30, 2024 |
| Archer AX21_V3/V3.6 | 1.2.0 Build 240809 | Sep 30, 2024 |
| Archer AX1800_V3/V3.6 | 1.2.0 Build 240809 | Sep 30, 2024 |
Wi-Fi 5 Routers (AC Series) |
||
| Archer C88_V2.2 | 1.12.11 Build 230602 | / |
| Archer C80_V1&V2.2 | 1.12.1 Build 221212 | / |
| Archer A8_V1&V2.2 | 1.12.1 Build 221212 | / |
| Archer C64/A64_V1 | 1.12.1 Build 221212 | / |
| Archer C6/A6_V4 | 1.12.1 Build 221212 | / |
| Archer C86_V1 | 1.12.1 Build 221212 | / |
| Archer C59_V4/V4.80 | 1.12.1 Build 221212 | / |
| Archer AC1900_V1/V1.6 | 1.12.1 Build 221212 | / |
Some Customized Models & Hardware for the Local Market |
||
| Archer AX23V(JP)_V1 | 1.0.2 Build 20240429 | For Japanese Market |
Moderator Note:
1. The availability of EasyMesh Wired/Ethernet Backhaul may vary by region even for the same model. Please check your local website for more information.
2. The above list might not include all models and hardware versions. It is recommended to keep watching the firmware releases for your router, as the EasyMesh Ethernet Backhaul will be listed in the patch notes if/when it is added to your version.
Some of our EasyMesh Wi-Fi routers have added support for establishing a seamless mesh network via EasyMesh Ethernet Backhaul. You can now connect two or more EasyMesh devices together by wiring the satellite device to the main EasyMesh router. Please check for the updates on your router web GUI or Tether App for the new firmware, update and install the latest official firmware on the router to explore all the new features like EasyMesh Ethernet Backhaul.
Or you can download the latest official version from the local website and upgrade the firmware manually as follows:
How to Upgrade the firmware version of the TP-Link Wireless Router
Releases Notes for Archer C80/A8/C64, etc.:
New Features/Enhancement and Bug Fixes:
1. Improved EasyMesh features and added support for Ethernet Backhaul.
2. Fixed the bug that settings of DHCP server reset after the router reboots.
3. Fixed the bug that some wireless clients behind an extender are incorrectly identified as wired in client list.
4. Fixed the bug that could not bridge Wi-Fi using WPA3 encryption.
5. Fixed the bug that Network generates loops under specific scenarios.
6. Optimized packet filtering rules.
Releases Notes for Archer AX4400/AX72:
New Features/Enhancement:
This firmware contains important updates for HomeShield Pro, and we strongly recommend all HomeShield Pro users upgrade to this firmware.
You will be unable to downgrade to the previous firmware version after updating this firmware.
1. Newly support EasyMesh and Ethernet Backhaul;
2. Newly support to set LAN DNS server as WAN port DNS server;
3. Newly support Google Assistant function;
4. Newly support Tether Wireless Advanced Configuration;
5. Newly add Access Time Control and Bandwidth Control functions for the Guest Network;
6. Added Advanced features into AP mode;
7. Added flow control switch;
8. Added IoT network feature;
9. Added VPN Client feature;
10. Added Speed limit feature;
11. Optimized Quick Setup feature;
12. Optimized web UI of IPTV feature;
13. Port Forwarding maximum entries increased to 64;
14. Enhanced the stability and reliability of the HomeShield pro;
15. Removed some built-in NTP servers;
Bug Fixes:
Fixed some bugs related to the HomeShield feature.
NOTE:
To fully utilize all HomeShield Pro features, we recommend that you download and install the latest version of the Tether app on your mobile device.
For Android users: Recommended Tether version 4.1.23 or later
For iOS users: Recommended Tether version 4.1.11 or later
This latest version also includes some other enhancements and bug fixes. Take your time to explore all the great features or enhancements. Comment below if you have any feedback or run into any issues — we’re here to help.
Related Articles:
How to Build an Ethernet Backhaul Using Two EasyMesh Routers?
What is EasyMesh?
What is Wi-Fi EasyMesh and how does it work with TP-Link routers and extenders?
Other Articles that you may also be interested in:
Pre-Released Firmware Supports DoH and IoT Network for Archer C80 is Ready for Trial
Official Firmware Supports DoH and IoT Network for Archer C6 V4 Is Publicly Available Now!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Kevin_Z I have two AX55 Pro(EU) V1 routers. I have updated the firmware to 1.3.1 Build 20240426 (Pre-released version). I reset the second router, did everything according to the instructions for EasyMesh connection.
The Ethernet (backhaul) connection does not work. The two routers connected via wifi (the icon says so and the speed).
- Copy Link
- Report Inappropriate Content
Lovage wrote
Hi, there is any chanes to support ax12 ny blackhaul?
Last update of this devives was in 10.2023
@Lovage Thank you for asking.
I will check with the development team to see if they can provide a beta version or a pre-released version for AX12 to support EasyMesh Ethernet Backhaul.
I will update here once there is one.
- Copy Link
- Report Inappropriate Content
Good morning,
I don't see the AX58 V1 router in your table, you only mention the A58 V2.
Will version V1 ever be supported?
Because I have an AX58V1 as a main router and an AX53V1 as a secondary router (with version 1.2.4 which supports Backhaul)
Should I invert by putting the AX53 as main and the AX58 as secondary?
Thanks
- Copy Link
- Report Inappropriate Content
kostyax wrote
@Kevin_Z I have two AX55 Pro(EU) V1 routers. I have updated the firmware to 1.3.1 Build 20240426 (Pre-released version). I reset the second router, did everything according to the instructions for EasyMesh connection.
The Ethernet (backhaul) connection does not work. The two routers connected via wifi (the icon says so and the speed).
@kostyax Can you please reset the satellite AX55 Pro once again and follow this guide to add it to the mesh system via an Ethernet cable directly?
Please make sure the cable is good.
Once connecting them via an Ethernet cable directly, please login to the web management page again to check what is the status of EasyMesh, will it show an Ethernet connection or Wi-Fi?
- Copy Link
- Report Inappropriate Content
Fabien31 wrote
Good morning,
I don't see the AX58 V1 router in your table, you only mention the A58 V2.
Will version V1 ever be supported?
@Fabien31 Thanks for asking and welcome to the community.
Apologies that we haven't received advance notice on whether the AX58 V1 will support EasyMesh Ethernet Backhaul.
We can only provide a definite answer once a model receives beta or official version of firmware to support it. We will update this thread and add more supported models to the list as they become available.
Fabien31 wrote
Because I have an AX58V1 as a main router and an AX53V1 as a secondary router (with version 1.2.4 which supports Backhaul)
Should I invert by putting the AX53 as main and the AX58 as secondary?
To this question, the answer is no. Only when both the AX53 and AX58 support Ethernet Backhaul, you can connect them via an Ethernet cable to build up a mesh network.
- Copy Link
- Report Inappropriate Content
Thanks for the reply! I connected my AX55 Pro (Satellite) via the 1Gb port, and I connected via ethernet backhaul! But, when connected via 2.5Gb, it only connects via Wifi..... I checked different cables... It doesn't work.
When connecting through the 1Gb port (ethernet bachaul), the 2,5 port doesn't work at all. I can't see any devices connected to it.
Can you comment on that?
Quote: "After EasyMesh is built, all the ports on the satellite router (WAN, LAN, WAN/LAN) are available for Ethernet backhaul."
Will the 2.5Gb port on this router be activated in satellite mode in the future? Or have I done something wrong?
- Copy Link
- Report Inappropriate Content
kostyax wrote
Thanks for the reply! I connected my AX55 Pro (Satellite) via the 1Gb port, and I connected via ethernet backhaul! But, when connected via 2.5Gb, it only connects via Wifi..... I checked different cables... It doesn't work.
When connecting through the 1Gb port (ethernet bachaul), the 2,5 port doesn't work at all. I can't see any devices connected to it.
Can you comment on that?
Quote: "After EasyMesh is built, all the ports on the satellite router (WAN, LAN, WAN/LAN) are available for Ethernet backhaul."
Will the 2.5Gb port on this router be activated in satellite mode in the future? Or have I done something wrong?
@kostyax Thank you for getting back.
Did the 2.5Gb port work properly before the firmware update?
Based on your description, it seems the 2.5Gb port no longer allows a connection. To verify this:
- Reset the satellite AX55 Pro.
- Connect it directly to the front-end modem or router using the 2.5Gb Ethernet port, bypassing the first AX55 Pro.
- Log in to the AX55 Pro's web management page and check if the WAN port is up.
If the port is linked up correctly, it's functioning properly. If it shows as down, the port may be faulty.
If the 2.5Gb port is still functioning, reset it one more time and connect its LAN port to the LAN port of the main AX55 Pro, wait until the Ethernet backhaul is built up successfully, then try connecting the 2.5Gb port to a PC to check if the PC can get internet access.
If the 2.5Gb port is faulty, we recommend reaching out to the local tech support, so they can work with you in looking into the issue further or help with the replacement:
https://www.tp-link.com/support/contact-technical-support/#Hotline-Support
- Copy Link
- Report Inappropriate Content
@Kevin_Z The second router previously worked as an access point without building an easy mesh. It was connected via a 2.5Gb port to the main router (also 2.5Gb). Everything worked fine. I'm sure of the port's functionality.
Only in Easy Mesh Satellite mode the 2.5 port does not work. It is impossible to even connect devices to it. But when I reset Easy Mesh it works as Wan/Lan stable.
- Copy Link
- Report Inappropriate Content
kostyax wrote
@Kevin_Z The second router previously worked as an access point without building an easy mesh. It was connected via a 2.5Gb port to the main router (also 2.5Gb). Everything worked fine. I'm sure of the port's functionality.
Only in Easy Mesh Satellite mode the 2.5 port does not work. It is impossible to even connect devices to it. But when I reset Easy Mesh it works as Wan/Lan stable.
@kostyax I see. Thank you very much for the verification.
So once configured as a satellite router and connected to the main AX55 Pro via its LAN port (gigabit port, it's not the 2.5G WAN port) to build up EasyMesh network via Ethernet backhaul successfully, it's still not working if you connect it to the main or any of the client devices via the 2.5G port?
If that is the case, I would like to escalate your case to our support engineers to investigate further.
- Copy Link
- Report Inappropriate Content
@kostyax I see. Thank you very much for the verification.
So once configured as a satellite router and connected to the main AX55 Pro via its LAN port (gigabit port, it's not the 2.5G WAN port) to build up EasyMesh network via Ethernet backhaul successfully, it's still not working if you connect it to the main or any of the client devices via the 2.5G port?
If that is the case, I would like to escalate your case to our support engineers to investigate further.
Thanks for the reply. Yes, in Easy Mesh Satellite mode, the 2.5 port on the second router does not work. Without Easy Mesh Satellite mode, the port works. Please forward to technical service.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 28
Views: 254792
Replies: 917
Voters 9
