EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

948 Reply
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-04-09 01:27:05

  @Cyberdie 

 

Hi, as long as the main router and satellite router both support Ethernet Backhaul, it will work, so since AX10 V1/V1.2/V2 supports Ethernet Backhaul, Easymesh via Ethernet Backhaul with 2 AX10 routers should work, for the configuration, please refer to this guide: How to Build an Ethernet Backhaul Using Two EasyMesh Routers

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#722
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-04-11 12:12:58

Hello! Just wanted to say thank you and give positive feedback about AX53 beta firmware. Works great with AX53 as main, and AX23 as ethernet backhaul satelite.

  2  
  2  
#723
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-04-11 13:32:23

  @Kevin_Z in my setup I have a Archer AX10 firmware 1.3.9 Build 20230728 Rel. 45716 and a RE305 firmware 1.0.23 Build 230418 Rel.60395n and OneMesh isn't working.

If I setup the ethernet backhaul, my network is down!

The BR support says that AX10 hasn't support, but in this list, I see that AX10 has support.

  0  
  0  
#724
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-04-11 17:22:17 - last edited 2024-04-11 17:23:04

  @TiagoGiovanaz 

 

Hi,

 

I can't say anything about the Archer AX10, but the RE305 with firmware version 1.0.23 does definitely not support Ethernet backhaul.

 

The RE315 V1 with firmware version 1.0.30 is currently the only range extender supporting Ethernet backhaul. https://community.tp-link.com/en/home/forum/topic/644776

 

We can only hope that TP-Link releases a 1.0.30 firmware for the RE305 V4 soon.

  0  
  0  
#725
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-04-11 23:19:46

Pleased to report i've got ethernet backhaul working with 2x Archer AX53's (v1, with beta firmware). I also have an RE705x (WiFi backhaul) which is working well.

  0  
  0  
#726
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-04-12 01:06:58

  @wuicu @Michaelflat1 

 

Hi, thank you very much for the feedback about AX53 V1 beta firmware, really happy that it works fine with the Ethernet Backhaul.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#727
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-04-12 01:11:49

TiagoGiovanaz wrote

  @Kevin_Z in my setup I have a Archer AX10 firmware 1.3.9 Build 20230728 Rel. 45716 and a RE305 firmware 1.0.23 Build 230418 Rel.60395n and OneMesh isn't working.

If I setup the ethernet backhaul, my network is down!

The BR support says that AX10 hasn't support, but in this list, I see that AX10 has support.

  @TiagoGiovanaz 

 

Hi, AX10 V1 or V1.20 does support Ethernet Backhaul already, here is the firmware release note, however, since your RE305 V4 doesn't support it as @woozle mentioned, you could only use wireless backhaul between them. And when they are already connected via wireless backhaul, if you connect Ethernet cable as well, there will be network loop, that is why your network will be down.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#728
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-04-15 11:17:15

  @Kevin_Z 

 

I was looking for some AP/Router for outdoor use and stumbled upon AEP113-outdoor . Will these device(s) ever get easy mesh? I understand it can be used as range extender or I can have it as standalone AP, but this I´d like to avoid .. is there any outdoor easymesh (ideally also eth backhaul) capable device in the product range .. ? 

Mazel

  0  
  0  
#729
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-04-16 02:35:45

Czmazel wrote

  @Kevin_Z 

 

I was looking for some AP/Router for outdoor use and stumbled upon AEP113-outdoor . Will these device(s) ever get easy mesh? I understand it can be used as range extender or I can have it as standalone AP, but this I´d like to avoid .. is there any outdoor easymesh (ideally also eth backhaul) capable device in the product range .. ? 

Mazel

  @Czmazel 

 

Hi, as far as I know, Omada EAP products have no plan to support EasyMesh at this moment. And they only support Omada Mesh which is not compatible with EasyMesh.

 

If you have further questions regarding Omada EAP products, you could check or start a new thread on WiFi Forums - Business Community

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#730
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2024-04-16 05:07:46

  @Sunshine

Hi,thanks for reply,

is there any outdoor easymesh (ideally also eth backhaul) capable device in the Tp-link product range .. ? 
Mazel

  0  
  0  
#731
Options