Home Network Community > Wi-Fi Routers > EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
< Wi-Fi Routers

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

191011...

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

866 Reply
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-13 18:02:26 - last edited 2023-05-13 18:07:40

hi  @Kevin_Z,

 

Thanks for the effort.

 

A bought a third C80, did the initial setup, did the firmware update succesfull and did a factory reset.

Than used the WPS button to link with the main router. 

I have now have a working mesh network with 3 C80 'Routers'. 

Extenders are higher priced so this was a cheaper solution 😁

 

Regards, 

 

Thom

 

  3  
  3  
#98
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-15 03:50:35

@Thom_NL 

Great. I'm happy to hear the EasyMesh Ethernet Backhaul solution works good for you.yes

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#99
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-15 05:32:40

  @Kevin_Z,

 

Easymesh will be the next step.

Running on Onemesh for now. 🙄

 

Regards,

 

Thom

 

  0  
  0  
#100
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-05-15 07:23:45

  @Kevin_Z 

Any idea when thos would be available for Archer AX72?

  1  
  1  
#101
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-05-16 09:34:36

  @Thom_NL 

 

So your C80 routers are v2.20, but you're unable to update them with firmware 1.12.1 Build 221212 which supports EasyMesh with Ethernet backhaul?

 

Since you seem to be using OneMesh atm, do you know if they only communicate with each other over wireless backhaul or do they share the broadband over Wifi too? Meaning are your satelites C80 also connected with Lan cable?

  0  
  0  
#103
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-05-16 15:33:50 - last edited 2023-06-05 10:39:43

  Hi @g3n0,

 

Futhermore, it was Onemesh in the first place.

I had to the use the EN support page to download the correct EU firmware.  🤣

 

After some trial and error i now have 3 C80 'Routers'.

One as Main router two as sattelite.

All connected by wire and working smooth.

 

** UPDATE **

 

Nevertheless, the C80 web GUI indicates Easymesh, the Tether App indicates Onemesh.

@Kevin_Z  Seems like a job for the software development team laugh

*-*-*-*-*-*-* 

 

Regards,

 

Thom 

 

  6  
  6  
#104
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-05-17 10:08:19 - last edited 2023-05-17 10:09:37

  @Thom_NL 

 

Well, I guess most importantly - the scheme works :) Thanks for confirming!

 

Since I have a 1 Gbit connection, I wanted to utilize the wireless speed by waiting until the feature and FW is available for any of the AX devices (that can reach 800-900Mbits over WiFi). Considering that it has been almost 6 months since the initial release and no updates for other devices, I just might give up and get a few of the C80 routers as you did.

  0  
  0  
#105
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-06-11 10:34:28 - last edited 2023-06-11 10:38:08

@Kevin_Z 

 

Hi,

wondering if I can do something that will force the connection to ethernet.

I have 3 Archerc80 routers, upgraded to latest firmware and configured them to easymesh.

The routers have cat6 cable connections ... but one of them is showing as connected via wifi to a low signal.

 

So, what can I do to force the connection to go ethernet/wired?

 

mesh wifi 

 

 

  1  
  1  
#107
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-06-11 11:20:30

  @Flpp,

 

Did you connect them through the WAN port?

That can be reason.

 

Regards,

 

Thom

 

  1  
  1  
#108
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
2023-06-11 16:41:49

  @Thom_NL 

OMG!

That was it, I was not using the WAN port.

And as this was the second mesh device I just pluged it and ... forgot to check.

 

thank you!

  2  
  2  
#109
Options
191011...

Tags

EasyMesh Firmware Update Highlighted Thread EasyMesh Ethernet Backhaul
Related Articles
EasyMesh not on AX53
1675 0
What is EasyMesh and how does it work with TP-Link routers and extenders?
78925 19
EasyMesh Configuration
553 0
Archer C7 V5 - EasyMesh Support
1053 0
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
11128 9
Official EasyMesh Firmware for Archer AX55 is NOW available
34598 16
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.