Home Network Community > Wi-Fi Routers > EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
< Wi-Fi Routers

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

1234...

New Release EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

905 Reply
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-01-10 11:20:29

 

DS4 wrote

  @Kevin_Z indeed have unzipped the .bin file after downloading and tried to run the update from both my PC & laptop. I also downloaded the file one more time, but unfortunately I get same result. I am in EU but according to description this firmware should work in my region so I am a bit confused on the root cause of the issue. Any other tips?

 

 

Hello @DS4

 

I have just updated the firmware link in my original post for Archer C64, please download and upgrade it on your router again.

 

Please let me know if the new firmware works. Thank you.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#24
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-01-10 11:47:53 - last edited 2023-01-10 13:18:45

Edit:

 

@Kevin_Z I managed to download the file by removing "%20%20" at the end of the link. New file worked without issues. Thanks!

 

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

@Kevin_Z I am being redirected to the page below and no download is being triggered now. The other 2 links for C80 & A8 works just fine. Please re-check the link. Thanks!

 

  4  
  4  
#25
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-01-11 02:41:29

@DS4 

You are brilliant and right.yes Sorry for my mistake when updating the link for the new version of firmware.

 

I have updated the download link in my post now, and it is working.

 

Very happy to know it helps.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#26
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-01-15 22:30:31

  @Kevin_Z AX1500 work with that as well?

  0  
  0  
#28
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-01-16 02:47:10

  @Kevin_Z 

Where is the FIRMWARE AX73?
 

  0  
  0  
#29
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-01-19 07:31:12

I have a C80 main router and an additional C6 v3 router on my office, just need that last one to support EasyMesh with Ethernet Backhaul so I can actually make use of this, hopefully it gets added soon since the C6 v4 already has EasyMesh support. =D

  0  
  0  
#31
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-01-20 15:46:02 - last edited 2023-01-20 15:50:14

  @Kevin_Z thanks for the release. The only BUG so far is that the GUEST Network is not working in the Satellites. It only works in the main router and there´s no way to set it up in the satellites. Please, please fix this in the final release. Thanks!! (I have 3 routers Archer C80)

  0  
  0  
#33
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8 - SSID Hide Bug Report
2023-01-26 13:05:31

  @Kevin_Z Hi Kevin, Testing the Beta version at your link below, on two Archer C80 V1, connected by an Ethernet Backhaul. 

 

I think there is a bug on the Satellite Router, not "taking/getting" the right configuration of the Main Router.

 

The "Hide SSID" seems not to work on the Satellite Router

 

The "Hide SSID" feature was tested, & seems to work well on the Main Router, however the Satellite router keeps transmitting the SSID (although) set as Hide.  This can be confirmed to be "origin to" the Satellite by turning it on/off & seeing that the SSID is not hidden by it.   

 

I think that SSID hide is a basic security related issue.   Can you please confirm & provide an updated FW version ?

 

Further, a good feature would be explaining LAN->WAN connection between the Main & Satellite router on the GUI/Documentation & further listing that control GUI will go "off" on Satellite Router. 

May be a further good feature would be to add at least a basic "1 line" GUI on the Satellite router, telling something like "Satellite router GUI Mode - The Router is Controlled as Slave by the Main/Master router,  for Control Return to factory default 'Reset the router' "  

  0  
  0  
#34
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-01-28 02:34:12

  @Kevin_Z 

I need your help  connect C80 to AX55 in easymesh mode.

I have a C80 with Archer C80_V1.0_1.12.1 Build 20221220 firmware version

and a AX55 with 1.1.6 Build 20221126 firmware version.

1. I reset C80 (or set C80 as satellite router).

2. I set AX55 as Main Router

3. When AX55 adds satellite router, AX55 do not find a sattelite router.

Thank you.

 

  0  
  0  
#35
Options
Re:Early Release Firmware Adding EasyMesh Ethernet Backhaul for Archer C80/C64/A8
2023-01-29 02:50:22 - last edited 2023-01-29 03:16:00

 

FWag wrote

  @Kevin_Z thanks for the release. The only BUG so far is that the GUEST Network is not working in the Satellites. It only works in the main router and there´s no way to set it up in the satellites. Please, please fix this in the final release. Thanks!! (I have 3 routers Archer C80)

 

@FWag Are you saying that the Guest Network is not extended when adding the other two C80 to the EasyMesh network?

 

Could you please confirm how did you find it out? We will soon check it on our side as well. Thank you very much.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#36
Options
1234...

Tags

EasyMesh Firmware Update Highlighted Thread EasyMesh Ethernet Backhaul
Related Articles
EasyMesh not on AX53
1995 0
What is EasyMesh and how does it work with TP-Link routers and extenders?
86326 19
EasyMesh Configuration
675 0
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
12781 9
Archer C7 V5 - EasyMesh Support
1278 0
Official EasyMesh Firmware for Archer AX55 is NOW available
36132 17
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.