EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW

905 Reply
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
Tuesday

 

DiakonCZ wrote

  @Kevin_Z  doesn't seem to work with ax55 pro v1.0. UK.

I have ax72 as the main router, ax20 in office as satelite with ethernet backhaul, and ax55 pro siting on shelf to go to summer house when finished.

 

@DiakonCZ 

 

As per the firmware release notes, AX55 Pro v1.0 does support EasyMesh Ethernet Backhaul:

 

If it fails to establish the Ethernet Backhaul, please help verify some more details:

1. How long is the cable between the AX73 (I remember you mentioned you are using an Archer AX73 as the main node, please confirm) and the AX55 Pro? Try using a shorter cable to test and verify if the Ethernet Backhaul can be established.

Alternatively, you can move the AX55 Pro to the AX20's location and connect it with the same cable that the AX20 uses with the AX73. This will help confirm whether the cabling is the issue.

2. If the AX55 Pro still can't establish an Ethernet Backhaul connection by using the same cable, please log in to the AX73's web management page. Check how the satellite devices are connected to the main node and share a screenshot with us.

3. Please ensure you're running the latest official firmware on all devices.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#922
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
Wednesday

  @Czmazel 

 

Hi, may I confirm some information to understand your situation better?

1. Does the problem happen after firmware auto-update of Archer AX55?

2. If possible, can you draw the exact network topology?

3. How many clients do you have? 

Thanks for your cooperation~

 

  0  
  0  
#923
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
Yesterday - last edited Yesterday

  @Marvin_S 

 

Forgive my bad drawing skills - this should depict simplified network topology different color means different floor 

If the network goes crazy, what I do, is I drop the red cables from AX23 satelites and it goes fine again using wifi mesh (maybe I powercycle as well - not certain).

One observation or my personal feeling is that once it happens it somehow mixes up which satelite is which and indefinetly redirects the requests back and forth (seen it in main router topo map that it had screwed naming of the mesh devices)

 

  0  
  0  
#924
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
Yesterday

  @Czmazel 

 

Hi, thanks for your further sharing~

After consulting senior support with the information you provided, we may need to collect the information below for further research.

1. When the problem happens, you can log into the Web UI of the main AX55, right? If so, can you go to Easymesh page to check whether the satellite routers(AX23) still remain Ethernet connection? You may share the screenshot of their status if possible.

2. May I confirm all your satellite routers(AX23) gets flashing red LED? For the satellite which flashes red LED, can you change another Ethernet cable for it to connect to the main router?

3. As your network topology involves 4 floors, for your wired Ethernet cables, are they  buil-in the walls/floors? Can you put the satellite routers close to the main AX55  and use short Ethernet cable to connect to main AX55 directly for further checking?

Thanks for your cooperation!

 

 

 

  0  
  0  
#925
Options
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
20 hours ago

 Ethernet backhaul for AX58👌

  0  
  0  
#926
Options