Solution [RESOLVED] DHCP server settings of Archer C80 will be restored or changed once it reboots
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Solution [RESOLVED] DHCP server settings of Archer C80 will be restored or changed once it reboots
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This Article Applies to:
Archer C80_V1_1.12.0 Build 221010
Archer A8_V1_1.12.0 Build 221010
Archer C64_V1_1.12.0 Build 221010
Archer A64_V1_1.12.0 Build 221010
Issue Description/Phenomenon:
After upgrading the router firmware to the latest 1.12.0 version, some customers report the DHCP server settings of the router will restore to the default or change to a random one if they reboot the router. This may break down their network, since some build their own DNS servers locally and some require a fixed LAN IP address of the router.
Available Solution:
Please check for the updates on your router web GUI or Tether App for the new firmware, update and install the latest official firmware on the router, then observe if the issue gets resolved.
Or you can download the latest official version from the local website and upgrade the firmware manually as follows:
How to Upgrade the firmware version of TP-Link Wireless Router
Please let me know if this helps or not. Thank you very much.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I had been granted by you to get a beta firmware to an Archer A64 Eu v1.0 too because it got the exact same issue. Hovever admins have removed my posts since then like i needed to be silenced or somewhat and my firmware is the exast same bad one.
- Copy Link
- Report Inappropriate Content
bcseh wrote
I had been granted by you to get a beta firmware to an Archer A64 Eu v1.0 too because it got the exact same issue. Hovever admins have removed my posts since then like i needed to be silenced or somewhat and my firmware is the exast same bad one.
Hi, the official firmware to resolve the issue has been published already, please check for the updates on your router, or you can download it from the website and upgrade it manually:
https://www.tp-link.com/support/download/archer-a64/#Firmware
BTW, your original post was not deleted, you can find it below:
https://community.tp-link.com/en/home/forum/topic/591064
Next time if you cannot find your own post, you could click on your account name in the top-right corner, then go to My Posts, there you will find all the posts you have had on the community.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 7
Views: 3933
Replies: 12
Voters 4
