Can I use my C9 as an access point and still use its SSL capability?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I decommissioned my C9 router recently when I went full-fibre and my ISP installed its own hub. All well and good but I do miss the "Local Storage Sharing" capability of the C9 via its USB 2.0 port. Could I use the C9 as an Access Point and still use this feature? I wouldn't be using the C9 for internet access, wired or wireless.
If this is possible is there a guide on how to do this and if so can someone provide me with a link please? Sorry, but I'm a bit of a numpty when it comes to networking!
Thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Creedence Sorry, I forgot to modify the title before posting. For "SSL" read "Local Storage Sharing".
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@terziyski Thank you, I will now read and try to understand the document you referred me to. When I read the user manual I could find no reference to "access point" - it's all looking rather murky...
- Copy Link
- Report Inappropriate Content
That's because only Archer C9 v5 has an operation mode menu with an Access Point option.
If you really have Archer C9 v1 then you should use Case 2 from the guide I posted in my first post.
The HW information is printed on the bottom sticker of the device - here's how to determine which is it.
- Copy Link
- Report Inappropriate Content
Case 2 requires making changes to the ISP's router settings but I want to avoid that. What I could do, I think, is reinstall the C9, reset its network key to that of the ISP's router, and give it a try - or does that just sound too simplistic? Are there likely to be changes needed to the C9's settings? I'd hope not because it was working fine previously on a "hybrid fibre" connection.
- Copy Link
- Report Inappropriate Content
In both cases 1 & 2 changes should be made only on C9 - not on the ISP router.
You could probably use C9 as it is (without reconfiguring), but you'll introduce a double NAT in your network.
If you're not a tech-savvy, just ask a firend to give you a hand with configuring Archer C9 in AP mode - it's not as difficult as it looks.
- Copy Link
- Report Inappropriate Content
Thanks very much for your reply - you've been very helpful. I'll give this a try over the weekend.
- Copy Link
- Report Inappropriate Content
I give up - i couldn't access the Archer C9 v1 on my fibre network. Not sure why but it did complain at one point of not finding my previous non-fibre networks's SSID!
Thanks for your help.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 781
Replies: 8
Voters 0
No one has voted for it yet.