Knowledge Base What is EasyMesh and how does it work with TP-Link routers and extenders?
You may have heard that TP-Link embraces an updated EasyMesh protocol that allows building a multiple-AP mesh network with certified products from various vendors. It also breaks new ground in the network deployment compared with the previous Mesh standard. In this article, we will talk about what is EasyMesh and how it works with TP-Link routers and extenders.
What is EasyMesh?
EasyMesh is a standard certification launched by the Wi-Fi Alliance, which brings a standards-based approach to multiple AP networks. This kind of Mesh allows devices from multiple vendors to be onboard, configured, and able to communicate with each other to form Mesh Wi-Fi. This brings flexibility, enabling devices from different vendors to work together to increase capacity and effective throughput by forming a smart and adaptable network. Refer to What is EasyMesh to find more details.
TP-Link is committed to the development of EasyMesh products and has launched a series of Wi-Fi routers and range extenders that are compatible with EasyMesh (Full Product List). You can choose a Wi-Fi router with range extenders to form Mesh Wi-Fi, or several Wi-Fi routers to set up the Mesh Wi-Fi. Theoretically, TP-Link EasyMesh will work with any EasyMesh-certified products thanks to the standardized EasyMesh technology. However, EasyMesh networking methods can vary based on the manufacturers, we highly recommend using TP-Link EasyMesh products together to ensure the best performance and full compatibility.
As for the management, unified management via the TP-Link Tether app or web UI is available for TP-Link EasyMesh-compatible devices. The main router will work as the management center. You can set and modify the wireless settings such as network name, password, and advanced features like Access Control and QoS on the router. The router will then synchronize with your extension devices. However, unified management is not guaranteed for devices from other vendors.
Setup Video for TP-Link EasyMesh Devices
What is Wireless Backhaul in EasyMesh?
Wireless Backhaul in an EasyMesh network makes it possible to wirelessly connect two EasyMesh products including TP-Link Wi-Fi Routers and Range Extenders together to build a seamless Wi-Fi network, this benefits both extended Wi-Fi coverage and Wi-Fi network stability.
How does EasyMesh Wireless Backhaul work?
Router - Router Networking
Mesh Wireless Backhaul between Routers
Yes, you hear it right. In an EasyMesh network, now you could define a router as the main router, and easily add a satellite router to boost the Wi-Fi coverage.
EasyMesh enables automatic synchronization of wireless network settings across all the EasyMesh nodes in the network and saves your time of manually setting up wireless SSID and password on a satellite device(s).
How to add a router to an EasyMesh network as a satellite device
Note:
1. It is recommended to connect no more than 3 mesh nodes (2 satellite devices) in a single chain for better wireless performance.
2. A firmware update may be required for some models to support Router - Router Networking.
Router – RE Networking
Mesh Wireless Backhaul between TP-Link Router and Range Extender
The brand-new mesh solution also allows you to add Range Extender as the satellite device which is wirelessly connected to the main router and builds a seamless Wi-Fi network. How to add an extender to an EasyMesh network as a satellite device
What is Ethernet Backhaul in EasyMesh?
In EasyMesh, Ethernet backhaul refers to the use of Ethernet cables to connect multiple mesh nodes in a mesh Wi-Fi network. In a typical mesh Wi-Fi network, multiple mesh nodes are placed throughout a home or office to provide a strong and reliable Wi-Fi signal in every corner. These mesh nodes communicate with each other to create a single, unified Wi-Fi network. This allows devices to seamlessly roam between mesh nodes without experiencing any drops in the Wi-Fi connection.
Ethernet backhaul in EasyMesh takes this concept a step further by using Ethernet cables to connect the mesh nodes, instead of relying solely on wireless connections. By using Ethernet backhaul, the mesh nodes can communicate with each other at faster speeds and with lower latency, compared to using wireless connections, thus you can ensure a more robust and reliable connection between the nodes, resulting in better overall Wi-Fi performance throughout the entire network.
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
Please note that only some EasyMesh routers support EasyMesh Backhaul for now, you could refer to this thread for the specific information:
EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
EasyMesh Frequently Asked Questions
Q1. What TP-Link product will support EasyMesh?
Visit here to check all TP-Link EasyMesh Compatible devices.
Please be aware that certain models will require firmware updates to support EasyMesh, you could pay attention to the subsequent firmware releases on the TP-Link official website.
Q2. Can I use TP-Link EasyMesh products together with TP-Link OneMesh™ or Deco Mesh products?
Yes and No. Wi-Fi EasyMesh, TP-Link OneMesh™, and Deco Mesh are three different mesh Wi-Fi solutions provided by TP-Link. You cannot build a mesh network by mixing TP-Link OneMesh™ routers/extenders with Deco Mesh, but you can build up a mesh system with TP-Link EasyMesh and OneMesh™ devices. In another word, you can still build up a mesh network if you have an EasyMesh router and a Onemesh range extender.
Refer to the QA below for the main differences between EasyMesh, TP-Link OneMesh™, and Deco Mesh.
Q3. What is the difference between EasyMesh, OneMesh™, and Deco Mesh?
From the below chart you could have a general comparison between EasyMesh vs OneMesh™ vs Deco Mesh.
|
EasyMesh |
OneMesh™ |
Deco Mesh |
---|---|---|---|
Seamless Wi-Fi Network |
√ |
√ |
√ |
Working with a different vendor* |
√ |
- |
- |
AP Seamless Steering |
√ |
√ |
√ |
Band steering (Smart Connect) |
√ |
√ |
√ |
Router - Router Wireless Backhaul |
√ |
- |
√ |
Ethernet Backhaul |
- (Planned & Supported***) |
- |
√ |
AP mode | - (Planned***) | - | √ |
Mesh Protocol Supported |
802.11k/v |
802.11k/v |
802.11k/v/r |
Management Methods |
Web UI & Tether APP |
Web UI & Tether APP |
Deco APP & Simple Web UI |
Technology |
|||
Products & Compatibility |
Check TP-Link EasyMesh products >> |
Note :
1. Working with a different vendor*
Certified EasyMesh devices can work with each other, while we highly recommend using TP-Link EasyMesh products together to ensure the best performance and full compatibility.
2. Visit this site to get the EasyMesh Certified Products from multiple vendors*: https://www.wi-fi.org/wi-fi-easymesh-certified-products (from Wi-Fi Alliance®).
3. Planned*** : Kindly note that Planned is not a guarantee, as the plan can be adjusted or changed.
Q4. Will EasyMesh support Ethernet Backhaul?
Yes. EasyMesh will allow building a mesh network via Ethernet Backhaul, and some of the EasyMesh routers have already supported it via a firmware upgrade.
Visit EasyMesh Routers Support Building an EasyMesh Network via Ethernet Backhaul NOW to get more details.
Q5. Can I use TP-Link EasyMesh devices with EasyMesh products from different manufacturers or companies? Are they compatible?
Theoretically, TP-Link EasyMesh will work with any EasyMesh-certified products due to the standardized EasyMesh technology. However, EasyMesh networking methods can vary based on the manufacturers, we highly recommend using TP-Link EasyMesh products together to ensure the best performance and full compatibility.
Visit this blog to know more about EasyMesh: What is EasyMesh?
Welcome to leave your comments below regarding EasyMesh.
Related Articles:
Early Release EasyMesh Firmware for Archer AX55
EasyMesh Routers Support Building an EasyMesh Network via Ethernet Backhaul NOW
General Questions about EasyMesh
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Sorry for not making myself clear. Only the main router work in Router mode, the satellite one can join the mesh network via wireless at the moment.
Yes, currently only C80 V2.20_1.12.0 Build 220924 and later versions support EasyMesh. There will be other models support EasyMesh soon, please keep an eye on the EasyMesh Compatibility List.
Also, as per the list, Archer C80 V1 is PLANNED to support EasyMesh in the future via firmware updates. Unfortunately, we cannot provide you an ETA. Please also be aware that PLANNED is not a guarantee here, that might be changed due to hardware or firmware limitations.
- Copy Link
- Report Inappropriate Content
Could you please ask them to consider adding Archer AX72 onto the list. It contains the same hardware as the AX73 and probably the same firmware. The only difference is the CPU is lower spec. I can't for the life of me think why easymesh would be any more cpu intensive than onemesh.
- Copy Link
- Report Inappropriate Content
@Kevin_Z I just bought two RE705X and I'm looking for EasyMesh functionality but only the RE700X is on the list of supported devices.
Should I return them or are there plans to also release a firmware update for the RE705X?
- Copy Link
- Report Inappropriate Content
Thank you for posting on the TP-Link Community.
I honestly cannot guarantee that Archer AX72 will also support EasyMesh in the future, but surely I can bring your request to our development team, they will consider if this is possible.
It's suggested to keep an eye on the EasyMesh Compatibility List to get the most recent updates once a new model is added to the list.
- Copy Link
- Report Inappropriate Content
Eudy97 wrote
@Kevin_Z I just bought two RE705X and I'm looking for EasyMesh functionality but only the RE700X is on the list of supported devices.
Should I return them or are there plans to also release a firmware update for the RE705X?
@Eudy97 As per the EasyMesh Compatibility List, both RE705X and RE700X are PLANNED to support EashMesh in the future, you may keep an eye on it.
If you require using EasyMesh now, it's strongly suggested to return the RE705X and buy those have already supported EasyMesh, such as RE550 and RE700X.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Thanks for the link to the list. If it's planned then I'll wait.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
m1hn3a wrote
@m1hn3a Sure, we will do. While I cannot guarantee now AX11000 will be added to the list.
You can also vote on the following request to let your voice be heard by more:
[Under Consideration] EasyMesh feature in all OneMesh Routers
- Copy Link
- Report Inappropriate Content
Dear @Kevin_Z good day and let me say that I am very glad that EasyMesh is still moving forward!
As in my house I have four pieces of Archer C80 V1, one of which is the main router and works in Router Mode, and the other three work in Access Point Mode.
They are all connected to a Switch TL-SG3428X V1 with CAT6 ethernet cables and all devices are in the same VLAN, so I'm wondering if the EasyMesh network can be built over ethernet cables (Ethernet Backhaul)?
The DHCP server is turned ON on the main Archer C80 that is in Router Mode, while the DHCP server is turned OFF on all other Archer C80 that are in Access Point Mode.
And just to note that the Wi-Fi signal is ON on all four pieces of the Archer C80, while the ONT ZTE F680 is Wi-Fi OFF.
I am attaching the configuration of my network so that you can better understand what I am talking about and whether EasyMesh could work in my case?
Greeting!
- Copy Link
- Report Inappropriate Content
Ethernet Backhaul would be the next stage of EasyMesh as per Kevin's post, it is still under development:
- Copy Link
- Report Inappropriate Content
Information
Helpful: 14
Views: 92827
Replies: 131