Remote port is not working.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I have connected TL-WA850RE to my archer C6, I want to access the remotely Extender behind the Archer, I have added the entries as I use for others devices in Virtual Server. But once I want to login entering archer's IP along the port which I add as forwarding.
It shows error i.e (192.168.168.24:8081/error.html).
Archer C6 IP : 192.168.168.24
TL-WA850RE IP : 192.168.0.101 (LAN DHCP reserved)
Kindly assist in the above matter.
Archer C6 IP : 192.168.168.24
TL-WA850RE IP : 192.168.0.101 (LAN DHCP reserved)
If the port-forwarding in Archer C6 is like:
This might not work. TL-WA850RE doesn't have any remote management settings.
Hello @Jdhn
When remotely access the local device behind router, make sure you use router's public IP/ wan IP address:
As Case2-step5, try WAN IP address in Advanced-Status-Internet sector
Port forwarding: how to set up virtual server on TP-Link wireless router?
If this does not work, it is recommended to go to whatismyip website to check if the real public IP there is the same as the router's WAN IP.
If the wan IP is different, it is recommended to reach ISP side and see if they could assign an real IP address for you.
