MR-6400 "No Service" with Simcard 3
Hello !
How to fix problem that Simcard Provider 3 (INDONESIA) No Service when used on MR6400 ?
Tried already other mobile provider simcard and works perfectly but only Provider 3 got problem even i did tried with different Simcard 3 but still nothing works.
With these im include screenshot of my router.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Here additional info and logs that maybe help solving my problem
Thanks
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the feedback. Please help to confirm the following information:
1. Please make sure external antennas are installed properly
2. If you change the Network Mode from 4G Only to 4G Prefered, change Band back to Auto, will it work with SIM card 3? If so, please check Network Type on Status page to see if it is WCDMA or LTE
3. If you insert the same SIM card 3 into another 4G device or smart phone, will it work on 4G network? If so, are you able to check which 4G band it works on?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, for the point 3, if the same SIM card works fine on another device at same location, please help to check the network type and band working on that device.
If you tested it on a smartphone only, for android phone, you could install LTE Discovery App or LTE Cell Info: Network Status App etc. to check the network type and band.
For iPhone, please type *3001#12345#* into the area you normally use to input a phone number and press call. You will enter Field Test mode, and you should see the Freq Band Indicator or EARFCN or UARFCN number.
- Copy Link
- Report Inappropriate Content
Already tried matching same band that worked for phone but still got same result like log below :
Still getting disconnected.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 655
Replies: 5
Voters 0
No one has voted for it yet.