Archer C7 v5.0 WPA Enterprise Radius accounting configuration
Hello,
during the setup of the wireless SSID with WPA2 Enterprise, i found on the config parameter the Radius Server IP ADDRESS and the Radius Authentication Port (1812). No mention about the Radius Accounting Port (usually 1813). Is there any way to config it?
Thanks
Giu
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
If there are no dedicated entry fields for configuring the parameters for a RADIUS Accounting Server in the router's configuration webGUI, then there is no way to do it, I am afraid.
By the way, I checked this on my own routers and apart from one router on which I installed OpenWrt, none of my other routers allows to set parameters for a RADIUS Accounting Server, so it appears this is something that isn't commonly available on home-grade Wi-Fi routers.
- Copy Link
- Report Inappropriate Content
Hi,
If there are no dedicated entry fields for configuring the parameters for a RADIUS Accounting Server in the router's configuration webGUI, then there is no way to do it, I am afraid.
By the way, I checked this on my own routers and apart from one router on which I installed OpenWrt, none of my other routers allows to set parameters for a RADIUS Accounting Server, so it appears this is something that isn't commonly available on home-grade Wi-Fi routers.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 839
Replies: 2
Voters 0
No one has voted for it yet.